RRSPORT.CO.UK |
||
Forum Gallery Shop Sponsors |
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Hi all :) - My 2013 L320 thread |
|
|
Bertbuckie Member Since: 04 May 2021 Location: Scotland Posts: 274 |
Can this be done with IID tool? I have misplaced my mongoose cable. |
||
Tue Mar 07 2023 1:53pm |
|
TheWojtek Member Since: 08 May 2015 Location: Poznań, Poland Posts: 737 |
Look for "Steering sensor renew", the IID manual says it does it for L322, but the manual is kinda old so maybe it is available with your unit. Regards etc.,
|
||
Tue Mar 07 2023 1:57pm |
|
Bertbuckie Member Since: 04 May 2021 Location: Scotland Posts: 274 |
Cheers. I think it’s my battery causing all, wish the damn thing would hurry up!
|
||
Tue Mar 07 2023 2:12pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
That looks fairly normal. After startup the BMS lets things stabilize before it tells the alternator to start pushing power.
|
||
Tue Mar 07 2023 9:14pm |
|
Col Member Since: 02 Sep 2012 Location: Hawkes Bay NZ Posts: 4971 |
Shows the voltage with the gap tool left in.
|
||
Tue Mar 07 2023 10:08pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
Ahh, that would explain it.
|
||
Wed Mar 08 2023 5:41am |
|
Bertbuckie Member Since: 04 May 2021 Location: Scotland Posts: 274 |
Defo battery. Wouldn’t start this morning 😂🙈
|
||
Wed Mar 08 2023 7:45am |
|
Bertbuckie Member Since: 04 May 2021 Location: Scotland Posts: 274 |
IID tool does it when plugged in and that makes sense as to why it stays low a min or two. |
||
Wed Mar 08 2023 8:17am |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
11.5v before startup, you’re screwed. 11.5v after startup wouldn’t surprise me. 12.6-12.8v overnight is ideal. Mine takes a little beating with the timed heater, but if I check it before it kicks on it’ll show me 12.6-12.8v most mornings, unless it’s down around -10° or lower. I’ll check mine right now as I’m about to leave, although my timed heater is running as I type this. 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
|
||
Wed Mar 08 2023 4:12pm |
|
Bertbuckie Member Since: 04 May 2021 Location: Scotland Posts: 274 |
Aye it’s under 12 to start. Cold here just now, think it was -10 this am. I also agree the times climate finished the battery off, but in fairness it’s 10 years old now so it’s done well. Still no sign of the one I ordered 🙄 |
||
Wed Mar 08 2023 4:34pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
Mine read 12.4v just as the timed climate finished its 30 minute run. 12v right after start up. 12.6v about 15 seconds in. 13.4v about 30 seconds in. 14.7v once I started driving a bit.
|
||
Wed Mar 08 2023 5:12pm |
|
Bertbuckie Member Since: 04 May 2021 Location: Scotland Posts: 274 |
Well, fecking battery is 5mm too big length and width…. And still got issues turning tho all other issues solved. Fml. |
||
Sat Mar 11 2023 6:52pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
What battery is it? 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
|
||
Sat Mar 11 2023 8:57pm |
|
Col Member Since: 02 Sep 2012 Location: Hawkes Bay NZ Posts: 4971 |
There does appear to be a differing opinion on which type battery fits these cars a 019/17 or a 020, which some say they have fitted, however on mine there was no way a 020 was going to fit without forcing it in. The 019 fits straight in the carrier no problem as its about 40mm shorter than the 020, whether it makes a difference not sure but mine is the 5.0L S/C not a diesel.
|
||
Sat Mar 11 2023 9:09pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
Mine is 353x175x190 and drops in without too much fuss. 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
|
||
Sun Mar 12 2023 5:00am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2005-2024 Futuranet Ltd & Martin Lewis