Can someone tell me where suspension control module is found on 2007 rrs 3.6 tdv8 hse please

The air suspension control module on the Land Rover Discovery 3 is located behind the driver's side instrument panel.

Is the range rover sport the same Karlos

range rover sport is a Discovery 3 on steroids lol

Thanxs m8 I only know its l320, didn't know it was same chassis etc

The air suspension module is up on the base of the A-pillar behind the dashboard. You can access it by dropping the panel below the steering wheel and then reach up above the pedals. It's a bit tight but you can get to it. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Thank you, will get round to it soon as height sensors changed, having to wait for parts, even from main dealers here in Belfast

Are you thinking of changing the module? Why? If you do, you need to set it up as it contains different settings for the heavier TDV8 to the other versions. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Am changing height sensors but another forum suggested it could be module, I know I would have to get it recoded if it does need changing

whats up with it?

Sometimes front os or ns goes into extended mode for no apparent reason, have noticed only when really wet here, so think height sensor sticking or possibly sticky valve block am working through things

Your air suspension system is full of the desiccant from the compressor dryer. The compressor exhaust valve is sticking due to this contamination. When the vehicle tries to lower the air can't leave the system and the system goes to extended due to thinking its hung-up on something. 2009 Range Rover Sport Supercharged

Do I need to replace anything, or can good mechanic clean it, have problem with hands so would not be able to do it, would this cause amber suspension light with normal height only or is that another issue m8