Just arrived in the Alpes and out of the blue my sat nav screen is stuck on the agree page, when I touch the agree button nothing, not responding to touch, removed disc and cleaned but still will not allow me to confirm agree on warning screen, MY 2008, can anybody suggest the issue or resolution, do not fancy driving back to UK without sat nav.

Many thanks

Where are you roughly? I am in Gaschurn, Austria and I have an IID Tool with me if that can help.

Hi mate, I'm in Tignes so a bit far for you but many thanks for the offer, what is an IID tool?

Yep, 400 miles.

The IIDTool is a diagnostic tool for reading fault codes and changing some parameters on the car.

Good luck with getting home.

Just an idea - try putting the passenger seat fully forward - disconnect & reconnect each connection at a time in the rear of the Sat Nav unit - never know it might reboot the system.

Good luck  16MY Estoril Blue SVR.............
17MY Autobiography Dynamic - Corris Grey - WOW.
14MY Autobiography Dynamic - SDV6 - Fuji White
12MY Autobiography - SDV6 - Santorini Black - Dual View - Rear Entertainment - Sunroof.
12MY Autobiography - SDV6 - Orkney Grey - awesome ;(
2005 Java Black - 4.2 V8 Supercharged First Edition- will never be forgotten ;(

Cheers, will give that a go in the morning

You need to do a hard reset..

http://www.disco3.co.uk/wiki/Hard_Reset

Flack

Update, it is now responding intermittently but more times not, Cheers Flack will try the hard reset,

Further update, I think it does not like the cold, lefts all day in the sun yesterday and worked fine every time, parked up for an hour and temperature had dropped to freezing and not working, will get it a thermal jacket!!!

Well hard reset carried out but still not working correctly, I'm lost on this one!

Sometimes some dirt can lodge inside the rim of the screen, this then stops it from responding to your touch, take the screen out and remove the screen bezel and check nothing is jammed in there, other than that you might need a new screen.


Flack

Hi Flack, many thanks for the advice, is there any instructions available on how to remove?

Update, cleaned around the screen bezel, there was some dirt and some bits of grit in there, touch wood all working fine since, many thanks Flack