Hi all,

I replaced my slam panel as it was no longer touching the window.
Looking at the A Pillar covers/moldings, the foam has deteriorated, so looking to refresh or replace.

Does anyone have any experience with doing this?
Can you use aftermarket or should you use OEM/EM versions?

I only ask as they are not readily available.
Maltings sell some made by Allmakes 4x4. Are these ok?

Any help very much appreciated.

I refurbished mine pretty simple job to be honest
Look here https://www.rrsport.co.uk/forum/topic59578.html

Thanks, I'll have a look.
Did you replace the foam and the foam "button" Mine has turned to mush,.

Just to add, it's the external moldings. L320 Range Rover Sport 2008
3.6 TDV8

I havnt done anything to my external A pillar trims except remove and refit a couple of times with new fixings and extra water proofing

Thank any way.
I've bought some replacements as mine let in water and whistle quite badly.

They didn't fit very well, but I've replaced the scuttle panel and everything seems to fit better. L320 Range Rover Sport 2008
3.6 TDV8

New clips every time mines getting a new screen next week iv got a bag full of new clips ready for autoglass fitter