To answer your questions if you have been offered a 2012 interior the seats and door cards will all fit no problem. The rear dvd screens won't work as you don't have the harness (cables ) they could probably be retrofitted if it has the rotary dial (gear-knob) that won't work as it is electronic and 8 speed auto.

Hi ive just spoken to the person and he said the seats come with everything needed for the tv's to work, been reading a little do i after get it coded at land rover?
could you give me the list of stuff which should come with it for them to work so i can make sure he as the lot. sorry for all the questions again thank you

ABSport wrote:

Hi it's the complete unit cost is around £250 from dealer.

Hi everything works on it as it should, however as you say the DSC button is on the dash. There are two versions of the panel as mine is a SE model I opted for the basic standard gear surround. This way it was just plug and play. I know there is a different one which incorporates 1 more switch.
Your dealer will be able to help you with which one you require.

Thank you for your prompt reply. Since i have a supercharged with adaptive dampening i will have to get the second version LR044983. Most parts websites and the dealer said that it is compatible with the 2011 and 2010 version but the DSC button probably will be non functional as its on the dash itself.

I also have one more question - Did you have to remove the steering wheel to replace the wiper and the turn signal stalks or is it as easy as removing the top and the bottom cover behind the steering wheel to replace them?

Thanks

Hi just remove the top and bottom cover and each stalks are held in with 2 small screws they just push in and out. Hope that helps

Thank again for your help. I got the stalks installed without any issues. Now I'm working on installing the gear surround.

nashvegas wrote:

ABSport wrote:

Hi nashvegas
Yes it is a direct replacement I also did not like the rotary switch. The newer "rocker lever" looks so much better, only problem is this is very expensive even with my trade discount from Land Rover it was still £230. however the grey trim around the cup holder and gearstick was £40. This is a little bit more fiddly to replace

That is superb news! I am going to try it. I wonder what it might look like to keep the metal / noble trim and add the 2012 shifter surround (maybe good... I'll try it and post up)

Also - one question - I realized that the DSC button which on the 2010 is replaced by the liftgate button on the 2012 has moved down to the shift surround. What happens if you press that button on your 2011 w the conversion?

ABSport wrote:

Hi just remove the top and bottom cover and each stalks are held in with 2 small screws they just push in and out. Hope that helps

It has 2 screws underneath where the Range Rover emblem is they are directly beneath that. The only way to get to them is the top part of your centre consul has to be removed and you'll be able to undo the screws. Bit of a ball ache but be careful not to scratch or mark anything.

TIP, where you insert a CD you need to unclip the plastic cover and you'll see 2 small screws remove them and the consul will be able to be removed.

Very nice always liked the autobiography!

Nice job!

That is most impressive   SDV8 vogue SE.
Corris grey and ivory leather + most of the toys.
Limited edition RRS model number 0001
Gone TDV8 RR Sport. Never to be forgotten.

Wife has an i8 BMW

Thank you Sir.