The procedures described below are relevant to the following European specification models:
Model Chassis Model year

Discovery 3 / LR3 L319 2005 to 2006
Range Rover L322 2002 to 2004
Range Rover Sport (not supercharged) L320 2005 to 2006


1) Procedure to check/reset service status – Distance counter
�� Switch ignition OFF
�� Press and Hold left instrument panel reset button, switch ignition ON to position ‘I’ (accessories)
�� Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The
distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be
displayed.
�� Has the ‘Reset Distance’ limit been reached or exceeded?
o NO - Follow instructions in section 2 below
o YES - Follow ‘Reset Distance Counter’ instructions below
Reset Distance counter procedure
�� Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD
display.
�� To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5
times
�� The LCD will display ‘END SIA’. Switch ignition off
2) Procedure to check/reset service status – Date counter
�� Press left instrument panel reset button once
�� The LCD will display ‘RESET SIA’ followed by the service due date.
�� Has the ‘Reset Date limit been reached or exceeded?
o NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the
service interval check/reset procedure has been cancelled.
o YES - Follow ‘Reset Date Counter’ instructions below
Reset Date counter procedure
�� Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD
display.
�� To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5
times
�� The LCD will display ‘END SIA’. Switch ignition off 2005 Zambezi TDV6 - Gone but not forgotten
2009 Alaska TDV8 - Gone and much missed.



WINNER - 2009 �Idler Of The Year� Award
Runner Up - 2009 �Just Doing What It�s Designed To Do� Award


DO NOT CLICK HERE!

Hi Very Annoyed is there any way of reseting the service indictor on a SC

hi i have just triedthe above method but i only have one reset button on the dash and its on the right hand side clock so the above doesnt work is there any other way to reset the service counter all help would be gratefully recieved  Range Rover Sport 2.7HSE
22" overfich Wheels in Black
s/c Front and side Grills
Rear Screens
HST Rear Spoiler
Quad Exhaust
De Badged Front and Rear
Side Steps

Does anyone know how to reset the MY10 service indicator, thanks MY10 HSE 3.0 TDV6 : Santorini Black : Ebony Interior w/Anigre wood : Privacy Glass (total) : Sunroof : Sidesteps : Hybrid TV : Detachable Tow Kit : Spare Wheel Cover : 22" Dished Supersports

Adam270 wrote:

hi i have just triedthe above method but i only have one reset button on the dash and its on the right hand side clock so the above doesnt work is there any other way to reset the service counter all help would be gratefully recieved

The S.I.A. reset procedure detailed here will not work on the sport as this is for 02-05 L322 Rangerover NOT a sport.

For a MY08 Sport (i.e. One reset button on the instrument panel) it is something like this:

Hold down Reset Button
Turn Key to position 1 (so dashboard lights up)
"Service" will flash 4 times on the milage display
(You can release the button as soon as "Service" appears)
"dist" then appears on the milage display.

(Now this is where my memory is vague)

Depending on the type of service being indicated (distance covered, or elapsed time from last service) you need to either reset the "dist" service or toggle to "date".

To toggle to date, hold down the rest button for a couple of seconds. When "date" is displayed further pressing of the button through the display options confirms resetting of the service indicator


Usual caveats apply that any one following the above comments does so at their entire own risk

So how do I reset the service indicator on my 2006 (55) S/C??? 2014 RRS

Just tried it on my 2006 2.7... I have one button on the right and it doesn't seem to work. Anyone know a step by step on one button version?

Anyone??

You can't do it manually, i'm afraid its a trip to the dealers for them to plug it in to their machine, i had the same problem, £50 was the cost

Does anyone know an independant dealer in north london that could do the reset?

I have the workshop manual downloaded for my specific VIN - it has a manual process but it does not work (in fact I can not actually follow it) - why put it in if it does not work? typical landrover crap.

Landrover want you to get work done on their cars at their dealerships - might be OK in the UK bur not in Aust wherem dealerships are being wound back and owners might have to drive a 2000km round trip to get their vehicles serviced - then most landrover dealers are not better than the local backyard mechanic but they do have the computer gear - but then the local mechanic tries to actually diagnose issues rather than waiting for a computer which just says - replece diff or replace gearbox.

Landrover have lost the plot - they are now Europe centric and their products are not fit for use (maintenance wise) outside metropolitan areas.

garry 07MY RRS TDV6
Arctic Frost
Aspen Interior

Gary,
Does your downloaded workshop manual cover the RRS Tdv6 2006 model?
Where did you get this from?
Thanks

I paid for a subscription to Topix and downloaded the required sections from there. You download what is required for your VIN.

http://topix.landrover.jlrext.com/topix/i18n/index#

Garry 07MY RRS TDV6
Arctic Frost
Aspen Interior