RRSPORT.CO.UK |
||
Forum Gallery Shop Sponsors |
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Faults & Fixes > Abs traction and suspension lowering fault 2008 rrs |
|
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
All for tires match, similar wear and the correct air pressure? 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
|
||
Wed Aug 30 2023 1:27pm |
|
Hullrrs Member Since: 29 Aug 2023 Location: Hull Yorkshire Posts: 33 |
Hi thanks for your reply
|
||
Wed Aug 30 2023 3:37pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
Definitely check the tire pressures. After that you’ll want diagnostics to help pinpoint the issue. Hopefully not water getting into the TCCM. 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
|
||
Wed Aug 30 2023 6:26pm |
|
Hullrrs Member Since: 29 Aug 2023 Location: Hull Yorkshire Posts: 33 |
First thing I checked was the tyre pressures and all good there
|
||
Wed Aug 30 2023 6:40pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
Transfer Case Control Module. On a RHD I believe it is on the right side (looking at the engine) behind the battery. Sometimes water can drip down onto it and it’s not the best sealed unit I’ve seen. Pull the connector and check for corrosion on the pins.
|
||
Wed Aug 30 2023 8:52pm |
|
Hullrrs Member Since: 29 Aug 2023 Location: Hull Yorkshire Posts: 33 |
Thank you for your replies
|
||
Sat Sep 02 2023 11:01am |
|
jimbg Member Since: 29 Jan 2013 Location: By the River Dart Posts: 1829 |
11.8 volts is not good
|
||
Sat Sep 02 2023 12:01pm |
|
Hullrrs Member Since: 29 Aug 2023 Location: Hull Yorkshire Posts: 33 |
Thanks
|
||
Sat Sep 02 2023 2:30pm |
|
jimbg Member Since: 29 Jan 2013 Location: By the River Dart Posts: 1829 |
These beasts are voltage sensitive and cause all sorts of errors to be thown up. 2023 P440e SE Dynamic on order -cancelled
|
||
Sat Sep 02 2023 3:30pm |
|
gogsy1956 Member Since: 15 Jun 2013 Location: Tyne and Wear Posts: 942 |
11.8V is bordering on a flat battery,, and 13.9V running is not right. You should be seeing 14.6V at idle and a fully charged battery would be at least 12.6V. I would be investigating your alternator,, if you have access to a clamp meter you can check the charging current. 2010 RRS, TDV8
|
||
Sat Sep 02 2023 7:01pm |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
Exactly what gogsy1956 said and exactly what mine has shown for almost two years now. May need an alternator and battery cause those numbers aren’t good at all.
|
||
Sat Sep 02 2023 11:10pm |
|
Hullrrs Member Since: 29 Aug 2023 Location: Hull Yorkshire Posts: 33 |
Thanks everyone
|
||
Sun Sep 03 2023 6:55am |
|
NoExpert Member Since: 28 Jan 2022 Location: Poznań, Poland Posts: 478 |
It’s not too terrible of a job. Just a little fiddly to get access. 2011 RRS HSE Luxury 3.0 TDV6 Fuji White on Ebony/Ivory
|
||
Sun Sep 03 2023 7:52am |
|
Hullrrs Member Since: 29 Aug 2023 Location: Hull Yorkshire Posts: 33 |
Right then
|
||
Sun Sep 03 2023 12:17pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2005-2024 Futuranet Ltd & Martin Lewis