RRSPORT.CO.UK

    Forum   Gallery   Shop   Sponsors
Home > Technical > Not starting after engine rebuild. Lots of messages.
Post Reply  Down to end
Page 1 of 1
 
Charlieboyy



Member Since: 18 Oct 2016
Location: Tenerife
Posts: 9

2008 Range Rover Sport TDV6 HSE Chawton White
Not starting after engine rebuild. Lots of messages.

Hi guys just rebuilt the bottom end on my RRS 2.7 tdv6. Put the the body back on yesterday and today was the big start up day but she didn't start. It came up with some messages on the dash saying hdc fault and gear box fault. I plugged the dianostics in and came up with about 20 faults I'll put some pictures on with the codes. I's is a case just taking it to land rover and getting the ecu''s reset or is there a way to do it your self iv done loads of reading and only found how to do a simple reset. Thanks for any info guys. Charlie

Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge



Click image to enlarge



Click image to enlarge

Post #513901 Sun Jan 08 2017 10:12pm
View user's profile Send private message View poster's gallery Reply with quote
Andy K



Member Since: 18 Sep 2015
Location: GL
Posts: 4950

England 2005 Range Rover Sport TDV6 HSE Rimini Red

Did you touch the crank sensor ???

Post #513907 Sun Jan 08 2017 10:55pm
View user's profile Send private message View poster's gallery Reply with quote
Charlieboyy



Member Since: 18 Oct 2016
Location: Tenerife
Posts: 9

2008 Range Rover Sport TDV6 HSE Chawton White

Yes I removed it when I took the crank out and put it back in when rebuilt it.
Oh no what have I done!!!!!

Post #513910 Sun Jan 08 2017 11:47pm
View user's profile Send private message View poster's gallery Reply with quote
Andy K



Member Since: 18 Sep 2015
Location: GL
Posts: 4950

England 2005 Range Rover Sport TDV6 HSE Rimini Red

Do a search on here.

I think you need a special (and very expensive) tool to re align it.

And as usual the manual recommends changing the wheel with the magnets in.


Could be something else of course.

Post #513926 Mon Jan 09 2017 12:04pm
View user's profile Send private message View poster's gallery Reply with quote
Charlieboyy



Member Since: 18 Oct 2016
Location: Tenerife
Posts: 9

2008 Range Rover Sport TDV6 HSE Chawton White

OK thanks Andy would it be the trigger wheel alignment tool or the crankshaft sensor alighnment tool, I can only find a tool that aligns the trigger wheel ( the wheel with the magnets in). Looks like I'll be taking the body off again tonight. Thanks for your help mate.

Post #513938 Mon Jan 09 2017 1:39pm
View user's profile Send private message View poster's gallery Reply with quote
Andy K



Member Since: 18 Sep 2015
Location: GL
Posts: 4950

England 2005 Range Rover Sport TDV6 HSE Rimini Red

yeah trigger wheel.

Haven't done it myself, just read about it on here.


You may want to see if an injector fires. If it does, the crank sensor could be ok

Post #513965 Mon Jan 09 2017 6:23pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2005-2024 Futuranet Ltd & Martin Lewis
RRSPORT.CO.UK RSS Feed - All Forums

Switch to Mobile site