Just washed my RRS and found this cable hanging on exhaust - passenger side

Now either it was missed by QC on build or dealer has done it when they fitted tow electrics  Wanted a Series 2 LR since childhood but previously owned MY16 Disco Sport HSE TD4 Auto, MY13 RR Sport Black Edition TDV6 Auto, MY10 RR Sport HSE TDV6 Auto, 2007 Freelander 1 Freestyle TD4 Soft Top, 2009 Freelander 2 GS TD4 Auto, 2007 Freelander 2 GS TD4, 2004 Disco 2 Metropolis Auto, 2002 Disco 2 GS, 2000 Freelander 1 SE TD4 SW

Still hoping for a S2 one day!

I have got one too, on the drivers side? The connected plug appears to have 2 terminated wires in it as though it is meant as a blank. Cant see where its supposed to go? wondered if it was maybe a brake pad wear connector?
Paul

Found a similar thing behind a headlight and posted a similar question. Disco Mikey ID'd it as an unused part of the loom for TPMS.
Since found one attached by the lug to each wheel arch liner. They are pretty loose so could easily fall out. 2008 MY Java Black TDV8 HSE

That could be it ,Mine has 2 very short pieces of wire fitted into the plug (as though they have been cut off next to the connector). Maybe a wireless aerial for the TPMS
Just got to find out where its supposed to clip up. The connector i have is identical looking to muddywheels picture

Rear TPMS receiver connector

Cheers guys - now just got to find where it should be fixed

At least I know they didn't forget to connect abs or something critical  Wanted a Series 2 LR since childhood but previously owned MY16 Disco Sport HSE TD4 Auto, MY13 RR Sport Black Edition TDV6 Auto, MY10 RR Sport HSE TDV6 Auto, 2007 Freelander 1 Freestyle TD4 Soft Top, 2009 Freelander 2 GS TD4 Auto, 2007 Freelander 2 GS TD4, 2004 Disco 2 Metropolis Auto, 2002 Disco 2 GS, 2000 Freelander 1 SE TD4 SW

Still hoping for a S2 one day!

muddywheels wrote:

Cheers guys - now just got to find where it should be fixed

Look at the rear wheel arch liner; there are two holes about halfway up the rear side. The 'fir tree' lug on the connector should be plugged in to either one of the holes from the outside of the liner. No idea what the other hole is for though  2008 MY Java Black TDV8 HSE

Cheers

Don't know what I'd do without this forum  Wanted a Series 2 LR since childhood but previously owned MY16 Disco Sport HSE TD4 Auto, MY13 RR Sport Black Edition TDV6 Auto, MY10 RR Sport HSE TDV6 Auto, 2007 Freelander 1 Freestyle TD4 Soft Top, 2009 Freelander 2 GS TD4 Auto, 2007 Freelander 2 GS TD4, 2004 Disco 2 Metropolis Auto, 2002 Disco 2 GS, 2000 Freelander 1 SE TD4 SW

Still hoping for a S2 one day!

Yep, that's right Muddy. I had the same thing with my 09, it fell down after a dirt road (winery) trip. I stuck it back in the rear wheel arch housing and it didn't drop down again. I may have helped it with a little tape if I remember. Gone - 2008 Stornoway Grey RRS 2.7 TDV6
Gone - 2009 Buckingham Blue RRS 2.7 TDV6
Gone - 2010 Alaska White RRS 5.0 V8 Aspirated
Gone - 2017 Chawton White RRS 5.0 V8 Supercharged
Current - 2010 Java Black RRS 5.0 V8 Aspirated
Current- 2024 RRS P400 SE Dynamic