Hi guys,

As per the title, looking for advice on how to remove the lower glovebox. I have pressed hard on the guide arm to release that and now it is only held in place with the locating pins/hinges at the bottom.

Does anyone know how to remove these and then re-fit my new glovebox?

Any help appreciated. Would like to add some pics and make this a how to if I can!

Cheers guys  LCFC. Receiver of threatening letters from Overfinch.

Hi the lower glovebox is part of the top glove box it's one frame with 2 glove boxes you need to remove the heater vent and centre and then remove all the screws and the bottom side cover and pull it.

As above ^^
But be aware there is a screw on the right side, which can be a real pain to take out, sits kind
Of flush with the centre console trim, but apart from that its pretty easy.

Guys, I don't want to remove the framework. Just the cover.

As my pic shows, it hinges to the frame. My new glovebox cover needs to be fitted here, but I dont know how to remove the current one as there are, what seems like, spring loaded locator pins.

Any ideas?

Click image to enlarge