Afternoon All. Wonder if anyone has had issues with their sunroof & blind. Mine worked normally until trying it recently and now, no joy. icarsoft error as shown in pic. I've checked to make sure both plugs are in securely, which they are. Fuse 10 & 12 checked. I've tried the reset procedure of holding the roof button for 20 secs. The roof does make a 1 second noise as if it's opening but nothing else. The instructions are, to do it with blind closed, but that is stuck in the open position!! TIA

I have the same problem. Blind stuck in open position - what’s the reset procedure for that? Any help would be amazing. Thank you

The reset instructions from the workshop manual are

Once the power supply is restored, reset the roof mechanism as follows:
o Turn ignition on.
o Roof opening panel and roof opening panel blind system must be in closed position. (If not, use overheadswitches to close both).
o Press "Roof" close switch for 20+ seconds until the roof opening panel blind actuates rearwards and then forwards about 10mm
o Release "Roof" close switch and re-press "Roof" close switch again within 5 sec and keep pressed until the following sequence has completed.
o Roof opening panel blind opens fully.
o Roof opening panel opens fully.
o Roof opening panel closes fully.
o Roof opening panel blind closes fully.
o Release switch, roof is now fully initialized.

Hi mate. I tried the reset option but never worked for me. Took it to an independent in the end. They removed headliner and found a wire that had a cut in it, shorting on the metal.

Thanks both.

If tried this and it doesn’t work, the sunroof blind is in the open position and that’s the problem.

Any ideas? Cheers!!