quick question, changed the brake shoes and disc, i had to leave adjuster fully closed because cars not up on a ramp

is the above why the cars throwing a parking brake fault? ie it just needs adjusting, or do I get the discs off and see whats what.

I think you need to explain More

so i swapped out one sides brakes shoes and discs.

during this only the wheel i was changing is off the ground.

so i couldnt position the hole for brake shoes adjustment since it would attempt to move all 4 tyres when i tried to turn the one i was working on.

so i left the knurl fully closed.

when i turn on the car it throws parking brake fault and makes a noise like a cat is screeching, i assume the issue is because its not been adjusted and i haven't actually broken anything.

i will adjust it when i do the other side and get some heavy duty jack stands.

You only need to have 1 wheel up.

Jack car up. Put axel strand under 1 side for safety
Choc front wheels. Choc in the boot floor
Put gear selector in N
Park brake off
Remove key.
Should really remove P brake fuse to prevent any cat sceeetch probs
Now wheel will rotate

You may have to do this

Good luck !

https://www.disco3.co.uk/forum/epb-repairunjam-relatch-91299.html

Ahh perfect, I also have gap iid tool which has its own unjam procedure so fingers crossed there

All sorted ta. What happened was the parking brake cable slipped out of the enclosure cause I did it wrong so the cable is fully shut hence the noise from the motor. I just need to replace on of my wear sensor cause I broke it and slam dunk.

The neutral tip made it all happen although I did bend one of my chocs drove onto em

Forgot the choc was there?

yeah i drove forward and slightly bent the choc wear sensors done as well. squealing hasnt gone though. it is much better

I've driven over my chocs a few times . I think I need to make a sign to hang on the steering wheel reminding me they are there! Robin
2008 Range Rover Sport TDV8
Gone:
Jaguar S-Type V8 4.2 Sport
MGZTT 190 2.5

put it on the back of the "on charge" sign !