Does anyone have any ideas as to why I'm getting these fault codes?

Click image to enlarge

one of the 8 sensors has failed shorted
or a short on the wiring loom behind a bumper

sorry that doesn't narrow it down much !


If you have a fault code reader yourself, I would unplug the front loom below the drivers headlight.
leave it disconnected.

clear faults.
start car and put in reverse
release park brake

listen to see if beeps have changed
rescan fault codes and see if the top 2 are still there or not.

If its gone, fault at the front
if its still there, fault at the rear.


obviously it will complain about the 4 front sensors being disconnected

Last edited by Andy K on Tue Dec 17 2019 5:55pm. Edited 1 time in total

Cheers Andy for the reply, I dont have a scanner but will pass this info onto the garage see what they say. After they cleared the faults it worked fine for hours but then just went again.