I’ve finally narrowed down the knocking on my suspension to front anti roll bushes. The ones right under the gearbox area on my 2009 3.6 tdv8. Are they easy to do ? I have access to a hydraulic ramp which obviously makes things easier. Is there a free online manual that can be downloaded anywhere as hoping to do this job tomorrow or a link on this forum explaining how to do the job or do you suggest a dealer as not much experience on this type of job. Thanks.

Workshop manual: http://www.mediafire.com/file/yunzrqm47py4pww/RRSL320WSM2006.pdf 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

thanks but that's the owners manual, not the workshop manual. thanks anyway.

Are you sure? thought it started with Owners Manual then went to Workshop Manual.

Cheers
Col

I suggest you look again.  2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Sorry about that 😴

Hi, mine too had a knocking, the job can be difficult if the retaining bolts don't come out, and you need various 15mm spanners because the bolts themselves are very awkward to get to, I'm somewhat handy, but I had the advantage of having a full time mechanic there that knew exactly how to do the job.
Kev

its worth upgrading to poly while you are at it https://powerflexstore.co.uk/land-rover/ra...2005-2013/