So I purchased some alloy rims, very nice Style 6 for my RRsport 2013

The do not fit on the hubs!!!!

I do not feel like the sharpest arrow in the quiver right now...

Any reason as why they do not fit?

Cheers and merry chrimbo MY 2012 SDV6
1996 300TDI Discovery - Expedition prepared and blooded
1952 Land Rover 80 inch

If they go on but foul on something, it sounds like your offset may be wrong. On mine (admittedly an earlier model and V8 ) the offsett needed is ET53 and you seem to have 45

Are to stud holes in the right place? Robin
2008 Range Rover Sport TDV8
Gone:
Jaguar S-Type V8 4.2 Sport
MGZTT 190 2.5

If they don't fit the stud pattern or locate on the hub spigot, then they are not genuine L/R rims as all sport rims are 5 x 120 pcd and I think the spigot bore is 72.9mm I could be wrong on that measurement, but all 05 - 17 sports are the same although they do have different offsets depending on diam. and width if I remember correctly. Even the old P38's and disco's were 5 x 120 except the original disco 1, although a different spigot bore diam.

Cheers
Col

The have a landcover style for sure. Not sure if they are genuine, but they must fit some car.

Time to flip them.

John MY 2012 SDV6
1996 300TDI Discovery - Expedition prepared and blooded
1952 Land Rover 80 inch

If you have a look on the reverse of the wheel, you should see all the details you need including a LR mark (if genuine) Robin
2008 Range Rover Sport TDV8
Gone:
Jaguar S-Type V8 4.2 Sport
MGZTT 190 2.5