I wandered around my car & found that a pdc sensor was not working. I obtained a new sensor from fleabay. I downloaded the instructions on how to remove the rear bumper. I removed said rear bumper & replaced sensor. PDC still did not work I checked the loom had been properly connected, it hadn't so I connected it ( ). PDC still did not work Rather than take off the whole bumper again, I again tested connector then thought I would check the fuse just in case. Removed fuse and it was ok, so went to put it back in again. Dropped fuse and fuse tool down the back of the trim Spent ages trying to recover fuse tool and ripped hands to shreds Eventually got it out (not the fuse though) but what a pita. Only brightside is that with the fuse removed, I don't get the annoying "PDCs not working " noise every time I select reverse.

Going to have to f@rt @rse about again to remove bumper and check all the bloody fittings and sensors

Pfft...

Having a good day then

Does sound a bit of a ball ache though  ON THE WAY: BMW F21 M140i
MERCEDES GL350 - Metallic Navy Blue w/Grey interior

GOING: BMW F31 335D MSport+ xDrive Touring
GONE: Land Rover Discovery 4 HSE - Stornaway Grey w/Black Interior (wish we'd kept it )
GONE: BMW F10 520D MSport - Carbon Black
GONE:MY12 RRS SDV6 HSE Sumatra/Ivory/Grand Black Privacy glass