I have managed to get a few HST parts togther for an upgrade. The only thing I cant figure out before I give the car in is how the new foglights will fit into the HST bumper. The fitment of the HST foglights is totally different to the original ones. There are no screw holes in the actual foglights just a small plastic bracket at attatched to a long screw/spring type thing Any advice greatfully received

No advice from any HST owners or HST upgraders ? How do you change the foglight bulb on a HST bumper, there are no visible screws or fastenings on the front side of the foglight, is it a bumper off job ??

Many Thanks

Bobby is your man for technical detail.......i'm sure he will be on at some point or drop him a PM  L322 Big Daddy SUPERCHARGED 5.0 Autobiography - Here & Now!

5 series for the miles

RRS S/C factory built HST - Gone

45 others have been and gone!

I have no idea on HST bumpers.

The front fog lamps on the earlier models (up to 2009MY) were very straightforward - just pull out the bezel in front and unscrew the 3 screws on the lamp itself..




On the 2010MY model, you need to remove the front wheels to access the lamp from behind, again unscrewing the 3 screws..



Hopefully the above is helpful.  Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

Thanks for the help guys. The HST bumper foglights are different to the above diagram. My existing HSE foglights are secured the way you have indicated above. However the HST foglights do not have any screws or fastenings from the front. What ever holds them is behind

I was reading this post and noticed that i have a cracked fog light on my HST, i was wondering the same as you. i pulled off the fog light bezel and noticed that their was one screw attached to the fog light, i dont know if this is the screw that holds the fog light in place or not. TDV8 HST STORNOWAY ON A 58
Full Alpine multimedia install
Road Angel Pro
PS3

Hi shuzzy and fellow forumees,

Any luck in finding out how to change the fog light on the HST bumper.
After noticing that mine is cracked its the first thing my eye picks up when i am looking at the sport  TDV8 HST STORNOWAY ON A 58
Full Alpine multimedia install
Road Angel Pro
PS3

I have got hold of a bezel set from the dealers which includes a mounting ring for the foglight. I havent figured out how all this goes into the bumper yet. Azizbu would you mind taking a pic close up with the bezel removed please. The screw you can see from the outside just adjusts the aim of the foglight I believe. Between us we might make sense of it as I have a bumper which is off the car. Thanks [/list]

You will have to remove the bumper cover to get to them....a real pain in the a$$.

Maybe it's just push in...

Click image to enlarge

i have the HST fog light fitting kit if you need one £20 , i bought 2 by mistake when i did mine

I just replaced a cracked HST foglight this evening. The foglight itself is attached to a plastic surround/housing held on by two nuts/bolts. That "long screw/spring type thing" you are referring to is where the bolts go in to attach it to the housing. There are four screws that attach this foglight/housing unit to the inside of the bumper. There is no way to get to it from the front. You have to remove the bumper cover.

Hi guys

Anyone know where I can get bezel and fog lights for hst 2009 rrs