can anyone tell me how to remove the tailgate treadplate please? 09 alaska white black 22 saker's black gril's an vent's all black lettering black lr badge's inside and out tint's side step's turbo chip power upgrade full kahn exhaust colour coded every thing 2010 rear led's lowed by 45 mm

Very carefully! You need a powerful hairdryer to heat the glue/ sticky pads and a length of dental floss to run between the tread plate and the bumper to cut through the glue without marking the plastic of the bumper. Heat the tread-plate until it is quite warm and then work the dental floss under an end and then with somebody else aiming the warm air along the treadplate as you ease the floss along the bumper. 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

Oh reather like removeing the badge's thank's very much Tim  09 alaska white black 22 saker's black gril's an vent's all black lettering black lr badge's inside and out tint's side step's turbo chip power upgrade full kahn exhaust colour coded every thing 2010 rear led's lowed by 45 mm

Like most of the blingy bits it is only held on with heavy duty double sided sticky pads or adhesive 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

lol classy anyway thank you for the info  09 alaska white black 22 saker's black gril's an vent's all black lettering black lr badge's inside and out tint's side step's turbo chip power upgrade full kahn exhaust colour coded every thing 2010 rear led's lowed by 45 mm

A practical tip after I replaced my badges a couple of weeks ago.

Dental floss either kept breaking for me or cutting into my fingers even through gloves, so I used the plastic pallet banding.

If you get some of the thinner parcel banding (look in any skip at the back of shops or supermarkets etc) and use it to 'saw' through the adhesive with a hairdryer as Tim suggests, it works really well.

You can create enough of an angle away from the body too so that you don't even get any light abrasion marks. Even under super lighting you cannot see a single hairline mark on the paint. Just saw whilst pulling slightly away from the paint.

Hardest part was getting the foam sticky pads underneath off - enjoy the blisters, you'll know what I mean the day after.

i found fishing wire the best for de badging no blister's either lol  09 alaska white black 22 saker's black gril's an vent's all black lettering black lr badge's inside and out tint's side step's turbo chip power upgrade full kahn exhaust colour coded every thing 2010 rear led's lowed by 45 mm

Blisters came from trying to roll/rub the nasty sticky pads underneath off with your bare finger - but fishing line sounds good for sawing.

What is a "tailgate treadplate" ? Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

It's the treadplate on the tailgate! Come on, Bobby, keep up old chap!  

2009 Outstanding Contribution Award - Joint Runner Up
2009 'Tech-Head Of The Year' Award - Runner Up

Like it here? Then Donate to RRSPORT!!

must be getting old!

will have to look at the car later... Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award