Hi Guys,

Long time since I last posted on this site.

I am considering to color-code the grey plastic trim at the bottom of the
rear door (the one with the "RANGE ROVER" letters).

Do you know how can I remove that piece without breaking a clip or two

Did anyone remove it and document that in text or pictures

Thanks for all the help.

William RRS 2007 HSE V8 * Buckingham Blue * Ebony Leather * Cooler Box * Sunroof * Navigation * PTI Bluetooth * Side Steps * Mud Flaps * Body Side Mouldings * V-Kool V70 Heat Insulation Glass Film * Clear Side Repeaters * Color-coded Side Vents + Grille + Door Handles + Door Mirrors * S/C Rear Decals + Door & Steering Emblems * S/C Exhaust Catbacks * Tasmod Sills * Nokia Cradle + Phone * 22" Stormers * 1st Edition Badge

New Pics: http://www.rrsport.co.uk/gallery/index.php?cat=11210

Hmm.... might be one for Bobby's stock of GTR documents  

2009 Outstanding Contribution Award - Joint Runner Up
2009 'Tech-Head Of The Year' Award - Runner Up

Like it here? Then Donate to RRSPORT!!

I hear ya, shmoogle!

There's a one-page thing on the Liftgate moulding...

http://www.rrsport.co.uk/gallery/albums/us...lding1.pdf Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

Thanks mate  

2009 Outstanding Contribution Award - Joint Runner Up
2009 'Tech-Head Of The Year' Award - Runner Up

Like it here? Then Donate to RRSPORT!!

Thx Bobby,

The one-page is not very informative and adds to the my confusion

So do you think I should just pull it all out? Will I risk breaking any clips?

William RRS 2007 HSE V8 * Buckingham Blue * Ebony Leather * Cooler Box * Sunroof * Navigation * PTI Bluetooth * Side Steps * Mud Flaps * Body Side Mouldings * V-Kool V70 Heat Insulation Glass Film * Clear Side Repeaters * Color-coded Side Vents + Grille + Door Handles + Door Mirrors * S/C Rear Decals + Door & Steering Emblems * S/C Exhaust Catbacks * Tasmod Sills * Nokia Cradle + Phone * 22" Stormers * 1st Edition Badge

New Pics: http://www.rrsport.co.uk/gallery/index.php?cat=11210

My experience with tugging things off is that expect to break the clips - go to your parts department and pre-order replacements. 2005 Zambezi TDV6 - Gone but not forgotten
2009 Alaska TDV8 - Gone and much missed.



WINNER - 2009 �Idler Of The Year� Award
Runner Up - 2009 �Just Doing What It�s Designed To Do� Award


DO NOT CLICK HERE!

So Va, what other experience do you have in "Tugging things Off"  Speed Limits! not where I live!

Back in a D3

Did have: RRS TDV8 2008.5MY
Did have: Q7 3.0TDi S-Line/Tech/Comms pack
Did Have: Disco3 HSE

Sorry William, that's all the info I have.

You should actually have a closer look at the clips mentioned to have a better idea, I think.
The article says "release" and "install" the clips, nothing on "tugging"!
Remove the trim and have a look. They might be easier to work with than you thought.  Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

I think that like most of the exterior trim clips on the RR Sport, the clips on the lower tailgate applique are a one fit clip. So the term "release and install" basically means if you remove the trim you have to install new clips.

You will also need to purchase a new Range Rover logo to retro fit once the trim has been painted. Arctic Frost TDV6 SE. Aspen Leather, Cherry Wood, Privacy Glass, PTI, Tow Pack, Mudflaps, Tasmods, a new Fuelflap, a RRSport.co.uk umbrella in the boot & a RRSport.co.uk sticker on the rear glass.
__________________

Some people accuse me of thinking the world revolves around me, but I'm not stupid . . . I know it revolves around the sun. Which shines out of my @rse!!!

it just pops off, no clips need to be replaced, as long as you pop the old ones off. its very easy. there may be two screws but i'm not sure. just pop your trunk and look around the edges of the molding. if you dont see any screws that appear to be holding it in, yank very hard on the corner. You'll see the plastic pressure clips that lock it in.