My P sensors stopped working and my Hawkeye tester came up with this result, is it the sensors that are failing or the power to the sensors?

Could be short behind the bumpers

Or a sensor.

If you have no luck. Disconnect front bumper loom.
Clear codes.
Put car in gear
Park brake off.
Then rescan codes and see what u now have.

thanks for your reply - I will try remove the bumper next weekend

Hi

Sorry for the late response, but it was this weekend I finally got the time to look at the problem. (yeah - a year and a half later, I know )
I changed the sensors and Voila!!! the Parking Aid are back in business again

i didn't take the front bumper entirely of, I only removed the screws and titled the number enough to get to the sensors.
The rear sensor was right out sensor, and it is possible to change without doing anything with the number at all.

The Hawkeye fault reader did its job, and it would have been so much more difficult without it.