Hi all,

Is there a way of switching/mirroring the camera view, as at the moment it seems to me to be backwards, it's not got the yellow lines to follow but if it did they would turn the opposite way to what you need Its a 59 plate but seems to be a 2010 model

Many thanks if you can help

Alan

Quite a common fault on the earlier face-lifts, I think you may find you need a replacement camera. You won't have "bendy" yellow lines either unless you have the surround camera system fitted.

Cheers
Col

As Col says, back to front image means camera is u/s (another one for the buyers check-list).
MY2010 was the face-lift model

Cheers for that,

I'll have to have a look about for a new camera, when I find one do I need to program it into the system or can I just swap it for a new one ?

cheers
Alan

You shouldn't need to programme a new camera, but make sure you get the correct one as there are two different one's, although identical to look at, the standard camera has a 2 pins and a co-ax connection, the surround one has 4 pins and they are not interchangeable.

Surround Camera

Click image to enlarge

Click image to enlarge

awesome, thanks for that

Alan