RRSPORT.CO.UK • View topic - CTEK Comfort connector


		^ Advertise here ^ RRSPORT.CO.UK
		Forum Gallery Shop Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > General > CTEK Comfort connector

Page 1 of 1

Lindab

Member Since: 20 Nov 2017
Location: Dundee
Posts: 901

CTEK Comfort connector

Has anyone fitted a CTEK comfort connector Indicator panel. I want to fit it at the front of the car, somewhere unobtrusive but easily accessed. Looks like I may have to make up a bracket to hold it unless someone who has done it can give me some pointers. Image enclosed. Thanks

Wed Jan 03 2018 11:21am

Andy K

Member Since: 18 Sep 2015
Location: GL
Posts: 4953

2005 Range Rover Sport TDV6 HSE Rimini Red

I think someone fitted one in the side vent.

Personally I like fitting the indicator flying lead in the boot, as this does no damage and is cheap

Wed Jan 03 2018 12:02pm

d-9

Member Since: 10 Jan 2017
Location: Wiltshire
Posts: 311

2007 Range Rover Sport TDV8 HSE Java Black

Got mine under the bonnet, next to the battery. Just be careful it doesn't hit the fbh exhaust. Since I replaced the battery in February last year, I've not needed to use it, even when leaving the car parked up for a fortnight.

Wed Jan 03 2018 11:43pm

Col

Member Since: 02 Sep 2012
Location: Hawkes Bay NZ
Posts: 4977

2013 Range Rover Sport Supercharged Autobiography Santorini Black

I fitted the other style of Comfort Connector, just tucked under the back edge of the bonnet, that way don't have to flip the bonnet or unlock the car to plug it in or unplug it, and just tuck's away out of site when not required.

Cheers
Col

Thu Jan 04 2018 5:34am

Lindab

Member Since: 20 Nov 2017
Location: Dundee
Posts: 901

Col, Thanks for that, do you have any pictures of the connector in place.
On another matter, I was looking at your gallery pics & you have one of 28 Dec 2017 showing a part highlighted in red. Is this a soft rubber piece that sits on the top of the wing as both of mine (one each side) have ripped. If so do you know the part numbers. I have a 2014 Sport. How does it attach?
Thanks
Chic

Thu Jan 04 2018 9:16am

Col

Member Since: 02 Sep 2012
Location: Hawkes Bay NZ
Posts: 4977

Hi,

Part No. of those bit's are L/H LR084527 and R/H LR084528 not sure how they attaché but knowing L/R just probably double sided tape, if you do replace them might pay to use a good silicone adhesive as well as apparently the tend to fall off.

There are a couple of pic's 9 11 & 12 in my gallery of the ctek comfort plug, but I see you have a RRS2 so not sure you can fit it in the same way.

Cheers
Col

Thu Jan 04 2018 10:31am

Hog

Member Since: 03 Dec 2015
Location: Wassenaar
Posts: 254

2012 Range Rover Sport SDV6 HSE Lux Buckingham Blue

Col wrote:
I fitted the other style of Comfort Connector, just tucked under the back edge of the bonnet, that way don't have to flip the bonnet or unlock the car to plug it in or unplug it, and just tuck's away out of site when not required.

Cheers
Col

I did the same.

Hog RRS 3.0 SDV6 HSE Lux
RRS 3.0 TDV6 gone
LR 3 HSE V8 gone
DiscoveryII V8 Gone
Discovery 1 V8 Gone
Mustang Shelby
Alfa Guilia (classic)

Thu Jan 04 2018 2:56pm

Lindab

Member Since: 20 Nov 2017
Location: Dundee
Posts: 901

Col & Hog,
Ref Ctek looks like that's the way to go
Thanks
Chic

Thu Jan 04 2018 3:03pm

warkman

Member Since: 28 Feb 2015
Location: Warwickshire
Posts: 234

2006 Range Rover Sport TDV6 HSE Zambezi Silver

Hog wrote:
Col wrote:
I fitted the other style of Comfort Connector, just tucked under the back edge of the bonnet, that way don't have to flip the bonnet or unlock the car to plug it in or unplug it, and just tuck's away out of site when not required.

Cheers
Col

I did the same.

Hog

And me 😋 Just bought a RRS 06 MY HSE TDV6 136,000 miles, to be a second car to my bland, boring Mitsubishi Outlander 68 plate 2.0 petrol 4

Thu Jan 04 2018 5:06pm

Cymruambyth

Member Since: 27 Feb 2017
Location: North Wales
Posts: 1533

I`d have to use an extension to use my Ctek...probably not the best idea with all the rain Steve.

Fri Jan 05 2018 5:36pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum