hi all, I have TRIED (I say tried because I don't no if I've done correct or not) re calibrate suspension. So confused & didn't take note or save original settings before I messed about. I've also fitted LED DRL,S.

Ride height is pretty level/similar on all corners & all settings seem to all work ok.

CODES IN INSTRUMENT PACK
U0132 Lost communication with ride level control module

U0182 Lost communication with front lighting control module

U0159 lost communication with park distance control module.

Cleared faults with IID but come back soon after.

Take it to Steve Norman..... Visitor from fullfatrr.com
* GONE. 2012 RR Sport HSE SDV6 Orkney Grey. Now being piloted by RRSTDV8
* GONE: 2011 4.4 TDV8 Full Fat. Amazing piece of kit.
* Current. 1974 Lightweight 2.25L petrol. Old skool
* GONE. Freelander GS TD4 Manual MY2013. Orkney Grey with privacy, cold and clearview packs, armrests (a must!) and a spoiler.
* GONE. Range Rover Classic '93 200Tdi Factory fit
* 1949 80" in family since 1975

Are you getting symptoms with those codes? If not, just ignore them.

The good news is that the IID has already saved your original settings for you, so you can revert if necessary.  Visiting from DISCO3.CO.UK
2006 Discovery 3 TDV6 Auto HSE Zambezi Silver

Are you having any problems with the vehicle?

Whenever I scan my vehicle with the IID Tool I almost always find:

U0132 Lost communication with ride level control module

and

U0159 lost communication with park distance control module.

and some other to do with the HVAC unit (which I am told are always seen).

Talk to any diagnostics technician and they will tell you that 'lost communication codes can usually be ignored'

Assuming your front lights are all functioning normally - there is probably nothing to worry about.

must type faster  2008 MY Java Black TDV8 HSE

Thanks for replys, no doesn't seem to be affecting anything, I've disconnected the drl wiring harness and cleared faults (took for small drive) and codes not bk as yet so think it's that, can I get resisters to put on drl wiring harness to stop any codes, prob will be fine but I'm a bit ocd,

DrRob who/we're is Steve Norman.

When I reprogram or activate anything using my IID BT unit, I always end up with a long list of faults, brake assist, Traction control, etc all stated as missing or non operative, giving warnings to drive carefully to a workshop for assistance, the Windows will no longer operate as one touch. The clock and the radio generally have lost their memory, as have all the Sat Nav favourites.
Next morning everything that had disappeared as not working,(it generally takes three hours to all clear) now shows no faults and none shown on tester. Have to reprogram clock, Sat Nav favourites, and reset windows to operate under one touch, everything works ok, I have contacted makers, and they say it shouldn't be behaving like that, but currently cannot offer a solution, and I will be returning for correction or refund.

For info the unit is official stock, been updated to latest version, and registered, so must be a fault unless anyone knows otherwise? John

RRS MY12 SDV6 HSE. Sumatra Black/Ebony & Walnut + Dynamic Pack, + Cold Climate Pack + Memory Pack, Digital TV/DVD, Premium Leather, Cornering Lights, Cooler/Fridge Box, & most Options.

Just ignore the lost comms unless something not working

Mmmmm ok maybe not DRLS causing faults as they have returned so just going to ignore unless cause any issues,

http://www.tandsnorman.com

Very well respected on here and Disco3  Visitor from fullfatrr.com
* GONE. 2012 RR Sport HSE SDV6 Orkney Grey. Now being piloted by RRSTDV8
* GONE: 2011 4.4 TDV8 Full Fat. Amazing piece of kit.
* Current. 1974 Lightweight 2.25L petrol. Old skool
* GONE. Freelander GS TD4 Manual MY2013. Orkney Grey with privacy, cold and clearview packs, armrests (a must!) and a spoiler.
* GONE. Range Rover Classic '93 200Tdi Factory fit
* 1949 80" in family since 1975

Thanks DrRob, will def use them as not too far from me. Thanks a lot. 👍