Hi guys
Going o renew my brake fluid and pads all round soon and just wondered is there anything
I need to know has to bleeding brakes on the rrs 2005?
I use the ezibleed system which really does a great job,but just want to be sure not going to upset anything in the car
If I do a bog standard bleed etc
Cheers

that's fine, just make sure the reservoir doesnt go empty (as all other cars really)

I think the order is Rear left, front left front right rear right.  Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

Cheers!
I was always told to start with bleeding the wheel the longest away from the brake reservoir and work way forward to the nearest last
Dunno if it really matters?
Also if I change the discs also on the rear and wind down the handbrake mechanism through the inpection hole on the disc
How many times do I turn it back to release it? Some say 8 some say 5? And I'm guessin handbrake is off before I wind it down to tighten the disc first before releasing

Cheers

I'm sure that would be fine too.

As for adjusting the brakes, have a read of my brake bible.... (See link in my sig below)  Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

Yes I just read it! Very very good! Cleared everything up I needed to know
Thanks a lot matey!