Hi every one fairly new to the rrs only had the car 3 weeks it's a 57 plate 3.6 v8 everything appears to be fine except the wheel nuts appear to be over tight and the dealer I bought it from has just replaced rear discs and pads after a cracked disc problem 30 minutes after I took delivery of the car.

Can any one tell me what the correct torque should be for the wheel nuts as the car is going back to the garage on Tuesday for some more remedial work and I would like these setting to the correct settings, if I get a flat there is no way I can move the wheel nuts at the current pressures.

Can't help with your particular model, but for the MY11 RRS the torque figure for the wheel nuts is 133 Nm (98 lb.ft) according to the handbook.

check here for the 2007 model
http://topix.landrover.jlrext.com/topix/co...p;id=66046

Thanks I will look through the handbooks again os I cannot find the figure in mine.

140 Nm or 103 lb-ft Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

Thanks for the replies