Has anyone installed the LR stainless ateel pedal set? The gas and brake pedal fitment just requires
drilling 2 holes in each pedal and attaching with screws to back, but the footrest piece looks like requires
you to get behind/underneath it to attach the screws and there does not appear to be a way to remove/release
the footrest itself. Thx in advance! Mike mike murphy

Hi, You don't have to remove the whole footrest ,it's just the top part of it (a bit like a top on a box) You just need a flat bladed screwdriver or similar to prise the top off which sits inside the recess and then you will have access to the front/back to allow you to drill the two holes. Be very careful not to overtighten the nuts as you may shear the bolts off like I did? They look great when fitted.

.......you could always use a bit of 4x2......PM Misery, he has the method  L322 Big Daddy SUPERCHARGED 5.0 Autobiography - Here & Now!

5 series for the miles

RRS S/C factory built HST - Gone

45 others have been and gone!