RRSPORT.CO.UK |
||
Forum Gallery Shop Sponsors |
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General (L494) > Overfinch 5.0 SC V8 exhaust too loud |
|
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
Hello all.
|
||
Fri Dec 08 2023 6:58pm |
|
TheWojtek Member Since: 08 May 2015 Location: Poznań, Poland Posts: 737 |
Downpipes will not do any difference, it's not a turbo.
|
||
Fri Dec 08 2023 9:24pm |
|
Disco_Mikey Member Since: 08 Apr 2012 Location: Dundee, Scotland Posts: 4395 |
What model do you have? |
||
Fri Dec 08 2023 9:34pm |
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
That makes sense. Just seen a video where an Overfinch had a loud exhaust and the chap fixing it mentioned OF removing downpipes and backbox baffles so maybe it’s a fairly easy rectified. 🤔 It’s a 2017. |
||
Fri Dec 08 2023 9:45pm |
|
TheWojtek Member Since: 08 May 2015 Location: Poznań, Poland Posts: 737 |
Replacing downpipes (which would essentially create a whole new exhaust from the headers back) with high-flow units does not have a big implication soundwise, has some challenges though:
|
||
Fri Dec 08 2023 10:07pm |
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
Thank you very much for the information Wojtek.
|
||
Fri Dec 08 2023 10:27pm |
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
Thanks Dave. Hope to confirm later today. |
||
Sat Dec 09 2023 8:11am |
|
TheWojtek Member Since: 08 May 2015 Location: Poznań, Poland Posts: 737 |
Dave has a point. From what I've found, the Overfinch exhaust replaces the stock middle resonator with a significantly smaller unit and uses homeopathic amounts of muffling in rear silencers in the L320 and I wouldn't expect the L494 unit to be very different. @drb5 - once you're from below the car, check if yours is similar. Regards etc.,
|
||
Sat Dec 09 2023 12:23pm |
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
Well, it isn’t quite how I imagined it to be.
|
||
Sat Dec 09 2023 3:34pm |
|
TheWojtek Member Since: 08 May 2015 Location: Poznań, Poland Posts: 737 |
Oh God, that is painful.
|
||
Sat Dec 09 2023 5:14pm |
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
You got that right!
|
||
Sat Dec 09 2023 9:42pm |
|
Col Member Since: 02 Sep 2012 Location: Hawkes Bay NZ Posts: 4971 |
Not sure about Overfinch being responsible for that, looks more like the welding was done by The Backstreet Bodgit Company.
|
||
Sat Dec 09 2023 9:56pm |
|
drb5 Member Since: 12 Jul 2023 Location: Scotland Posts: 20 |
I’d have agreed with you Col, but from what I’ve managed to find out so far, it looks like OF dont this type of job up to maybe 2017/2018 and then they brought out their own system…? |
||
Sun Dec 10 2023 8:33am |
|
timhum Member Since: 06 Mar 2017 Location: Suffolk Posts: 389 |
Why not speak to Over Finch and ask for their advice? Tim
|
||
Sun Dec 10 2023 9:30am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2005-2024 Futuranet Ltd & Martin Lewis