Member Since: 29 Jun 2018
Location: Telford
Posts: 23
Cheers xrover
Sun Mar 17 2019 9:22pm
Kouze59
Member Since: 20 Oct 2020
Location: North
Posts: 8
knwatkins wrote:
That's right Buster. It's a single switch that switches both patch leads. It's a double pole switch so it's effectively two switches controlled by a single button. The switch I used was from Amazon, they come in a pack of 10 for £1.70....
I used some 'add a circuit' fuse holders from the internet, however, it's very tight to fit them in and not ideal for access to other fuses once installed. If I did it again, I would use the fuse with a breakout wire from Halfords...
I've just nipped out to the vehicle to take some pictures for you. Unfortunately, it's not clear to see so I have taken some pictures of the fuse box printout I used to guide me when doing the mod with the fuses highlighted....
Click image to enlarge
Fuse 49 > Fuse 24
Fuse 50 > Fuse 25
Hope this helps!
Hello, thank you for this mod. I have just installed it in my L320 and it works. As space is limited, I tried to use a single fuse, the 24, connected to the 49/50. This also works. Could this be a problem? I've also tried to find a fuse that is active after the ignition is switched on or after the engine is started, does anyone know of one? Thanks in advance
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Sun Mar 17 2019 6:40pm
