RRSPORT.CO.UK • View topic - ARCM-ACTIVE ROLL


		^ Advertise here ^ RRSPORT.CO.UK
		Forum Gallery Shop Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > General > ARCM-ACTIVE ROLL

Page 1 of 1

loonyball

Member Since: 29 May 2019
Location: ballymena
Posts: 30

2007 Range Rover Sport TDV6 HSE Rimini Red

ARCM-ACTIVE ROLL

good evening all, had the suspension warning come up on dash today along with a weird ''rolling' on the front end as if i was driving over a curb but surface was smooth, plugged in the iid tonight and i have
code C1119-09 (6C) "HYDRAULIC PRESSURE-GENERAL FAILURE INFORMATION-COMPONENT FAILURE"
i have done a quick google of the code and a lot point to the high pressure sensor on the block,
any idea's as to the best place to start ? thanks

Thu Apr 27 2023 8:20pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 9010

2012 Range Rover Sport SDV6 HSE Orkney Grey

From the manual:

Quote:
C111909 Hydraulic pressure Low fluid

Possible causes
Leak in high pressure primary
circuit
Leaking reservoir
Leak in secondary circuit
Direction control valves stuck
open
Pressure control valve fault
Pressure transducer fault
Blocked filter
Actuator fault

Action
Check and top up the fluid. Rectify leaks as
necessary. For sticking/faulty valves, install a new
valve block.
REFER to: Valve Block (204-06 Ride and Handling
Optimization, Removal and Installation).
For a pressure transducer fault, install a new
pressure transducer.
REFER to: Valve Block Transducer (204-06 Ride
and Handling Optimization, Removal and
Installation).
Install a new filter as necessary.
REFER to: Valve Block Filter (204-06 Ride and
Handling Optimization, Removal and Installation).
Check the system actuators.

First thing is to check the fluid reservoir for any losses. Then have a good look underneath and see if there are any obvious leaks as that'll point to the likely culprit if there is a leak. It might be worth checking the state of the valve block filter as they are pretty cheap (c.£30). Then it's looking at replacing the pressure transducer. Hopefully you won't need to replace the valve block because that's several hundred quid for the part. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Fri Apr 28 2023 8:32am

loonyball

Member Since: 29 May 2019
Location: ballymena
Posts: 30

seems i had a battery on the way out, checked the battery voltage on the iid tool and it was at best 12v after an overnight trickle charge, fitted a new battery and clear faults, did a battery learning function and now all is well, no warnings or lights, happy days !!!

Tue May 09 2023 8:44pm

RRSTDV8

Member Since: 12 Aug 2011
Location: Northamptonshire
Posts: 9010

Good news - a simple fix is always nice. And thanks for reporting back on the outcome, it helps others. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Wed May 10 2023 8:20am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum