Morning All. 2013 L494. The plastic trim on my running boards is coming adrift. Is there an "idiots guide" to the removal and replacement?. I want to clean them up, treat the rust and paint them, and repair the broken rivets.

Cheers
Phil.

I did mine recently, easy. Put car up to max height. From memory there are 3 brackets supporting the steps. Do not remove the brackets. Just remove the steps from the brackets (either 3 or 6 screws. Take it easy as they will be rusted. Give the steps a pull & they are off. Front edge is a bit harder, think I opened the door slightly to help, but no drama. My side finishers were fine unlike yours. Lots of rust, comes off easy enough. I put on rust preventative then some really decent enamel type paint.  Range Rover Sport (gone): Mercedes S63 AMG Coupe: 992 Porsche Carrera 4S: Range Rover Fifty P400e

Phil23 wrote:

Morning All. 2013 L494. The plastic trim on my running boards is coming adrift. Is there an "idiots guide" to the removal and replacement?. I want to clean them up, treat the rust and paint them, and repair the broken rivets.

Cheers
Phil.

I have a brand new set of brackets if you want them while you are doing the steps
Drop me a PM - Also I am in Scotland

I may well need them. Hoping to do it next week so will be in touch if I do. Cheers.

done the same on my l320 just take the side steps off
get a piece of wood and some good clamps
dob a bit of stick like to the trim clamp in place then drill a hole and rivet back in place I left mime for 24 hours before putting back on the rr