Can anyone tell how easy is it to replace the front and rear Range Rover Letters on bonnet and boot and where to get them.as some of mine have faded

Never had a problem with quality of their products and lettering comes with spacing/fitting templates.

https://www.powerfuluk.com/vehicles/range-...ering.html

Cheers
Col

+1 with Col.  Barrie.
2017-Jan 2024: 2005 RRS 2.7TDV6. Best car I ever had - until now!
Current: 2018 Ford Ranger Wildtrak 3.2

Thank guys
Are they hard to remove and then fit new one as never done it before

No it's not hard at all.
Use a plastic scraper/tool to remove the old letters - not a screwdriver (I think Powerful UK provide something.)
I was amazed at the amount of dirt behind the old letters and gave all a good clean before fixing the new ones.
The spacing template is perfect. You can't really go wrong.
If I can do it anyone can.  Barrie.
2017-Jan 2024: 2005 RRS 2.7TDV6. Best car I ever had - until now!
Current: 2018 Ford Ranger Wildtrak 3.2

Brill thank you

Often found the best approach to be a gentle heat with a hair dryer to loosen the glue and dental floss for the removal

Finish off with Tar & Glue remover to clean the residue RRS SVR Estoril Blue, Huracan Performante Spyder Rosso Mars, Tesla Model X Black

Thank you for additional advice it is appreciated
Steve

Coincidentally I've just been watching Wheeler Dealers on the TV (I know a bit sad but naff all on the TV Saturday morning) and Ant was removing the letters from a Dodge Ram using heat gun and dental floss. Definitely not a screwdriver.

I love wheeler dealers lol
Any car programme

I hate that Mike with a passion, so false idiot. Just get on with the car updates forget about that . Don't know who is worse, him or Tim Shaw on car SOS  Range Rover Sport (gone): Mercedes S63 AMG Coupe: 992 Porsche Carrera 4S: Range Rover Fifty P400e

Lol, Mike Brewer is a car salesman; i.e. Billy BS. I don't doubt for one moment that the purchasing and selling scenes are scripted. Good TV innit.

Just done mine today tried a few ways and in the end found the best and safest way was to heat them up slightly use hairdryer or heat gun from distance and use dental floss they come off easy, then i tried a few tools best was my nails to get alittle of the adhesive off them and just pull it off slowly in strips. Takes alittle time but not a difficult job to do.

Sounds like a plan will get some on order

its easy......says him who managed to get the rear squint with a template hahaha!

Youl be fine. hairdrier and credit card