Does anyone know how to remove the exhaust tips on a my 18/19 RRS. They are attached to the bumper.
I want to let them painted black because it’s the only chrome parts on my car.

Update: tried to remove them but stopped. They are attached to the rear bumper with 4 screws each. 2 are easy to remove without removing the bumper, 1 is difficult and 1 almost impossible because of the lack op space.
So, how to remove the rear bumper? Or maybee i bring it to the dealer to paint them...

I couldn't wait any longer and managed to remove the 2 exhaust tips. It took me 1,5 hour to remove the screws but it was really worth the work.
Very happy with the result. No more chrome on our beauty!

before:

Click image to enlarge

Click image to enlarge

Very Nice...  ===========================================
2012 Range Rover Sport Autobiography 3.0 SDV6 8 speed Automatic
Indus Silver with Hockenheim premium two-tone leather Ebony/Lunar,

Gijsv,

Did you paint them yourself? What type of paint did you use?

A friend of mine fits Towbar’s & he told me it takes him 10 minutes to remove the bumper on the L494. Andy.
21 Ford Ranger
Gone but not forgotten
Focus RS Red Edition
2015 RRS AB Fuji.
2014 RRS SC Santorini
2016 VW Amarok
2014 RRS AB Fuji
2012 RRS Red Edition Fuji
2015 Nissan Navara
2012 RRS SE Santorini
2008 RRS White
2007 RRS Santorino

@ Tyrefitter Is he a magician? I think it's bull....
On my RS6 C7 it took me 45 minutes after a couple of times. On the MY 2019 it will take at least 1,5 hours to do it decently...
Look here why i didn't took off the whole bumper: https://www.rangerovers.net/forum/43-range...f-all.html

I let it paint at a paintshop in gloss black. Range Rover Sport P400e HSE Dynamic | Loire Blue | 2019

Apparently their is only about half a dozen screws & it just unclips with a bit of a pull,he has done loads of them.I suppose if it’s the first time & you’ve not done one before & not knowing what your doing it could take longer.
It’s like anything,I had a ford KA in for mot & it failed on 2 bottom arm ball joints & you need to take front bumper off & front panel just to get to 2 front bolts,everyone I spoke to said they were a nightmare to do,it took me 1.5 hours all in to do the job.it literally took me 5 minutes to remove front bumper 10 screws & then just pull the bumper off,I know it’s only a ford KA but the principal is the same. Andy.
21 Ford Ranger
Gone but not forgotten
Focus RS Red Edition
2015 RRS AB Fuji.
2014 RRS SC Santorini
2016 VW Amarok
2014 RRS AB Fuji
2012 RRS Red Edition Fuji
2015 Nissan Navara
2012 RRS SE Santorini
2008 RRS White
2007 RRS Santorino

20 Mins max , as above half a dozen screws and back lights out and it pulls off

Got to be saying it looks hellishly better for it.....the 18/19 facelift is just too blingy....making them look like a Mercedes....

That looks a lot more elegant...thanks for sharing!

Red Arrow wrote:

20 Mins max , as above half a dozen screws and back lights out and it pulls off

Ok, maybee i'm to cautious..  Range Rover Sport P400e HSE Dynamic | Loire Blue | 2019

I’m just having a pint with my Towbar mate & he’s telling me it takes him 2 hours to remove bumper fit Towbar fit twin electrics & refit bumper,as for removing bumper he’s done that many it takes him 15 mins. Andy.
21 Ford Ranger
Gone but not forgotten
Focus RS Red Edition
2015 RRS AB Fuji.
2014 RRS SC Santorini
2016 VW Amarok
2014 RRS AB Fuji
2012 RRS Red Edition Fuji
2015 Nissan Navara
2012 RRS SE Santorini
2008 RRS White
2007 RRS Santorino

@gijsv how did you remove the last screw ? It’s very hard to reach for me

Which last screw.? Andy.
21 Ford Ranger
Gone but not forgotten
Focus RS Red Edition
2015 RRS AB Fuji.
2014 RRS SC Santorini
2016 VW Amarok
2014 RRS AB Fuji
2012 RRS Red Edition Fuji
2015 Nissan Navara
2012 RRS SE Santorini
2008 RRS White
2007 RRS Santorino

Maybe this could help



 Current - 2020 Range Rover Sport P400e
Gone - 2014 Range Rover Sport HSE SDV6
Gone - 2017 Audi A8 Sport
Gone - 2007 Range Rover Sport HSE TDV8 - Great car.

As GijsV mentioned, the exhaust tip is attached to the inside of the bumper with 4 screws. 3 are relatively easy to remove but the last one is very hard to reach.

I’d rather not take the lights and bumper off.