Hi Guys

New member - recent defector from the Disco3 forum.

I have recently bought a 2012 RRS HSE and the plastic surround to the rear view mirror is missing (bought like that and never noticed). Anyone here able to identify the part number for me? I have looked at the usual salvage places and eBay where it seems it's just as easy to get the complete mirror, it seems like there is a few varieties out there though.

Many thanks.

If you are referring to the interior mirror they are only about £10.00 for the pair from L/R, but I think there is a choice depending if you have high beam assist etc. I recently replaced mine when new screen fitted.

Cheers
Col

Thanks Col

Think I'll try and see if there is a dealer open by me and get them to identify and cost. Just not sure who is open at the moment.

Just had a quick look, if you have high beam assist it looks like you need LR018798 & LR018799 if you don't then it's LR024856 & LR024857 the stupid thing is the high beam assist one's appear to be £5.38 each what I paid and the non assist one's are over twice the price at £11.36 each but that's L/R for you.

Cheers
Col

Thanks a lot Col

To be honest after owning a disco before this I have found that anything below £50 is a bonus!! Thank you for checking up for me - very much appreciated.

Neil

Col I am going to ask a very newbie question now. How do I know if I have high beam assist 😉. Can't see anything in settings?

Not totally sure, but If you go into vehicle set up via the menu it should be listed there so you can turn it on or off etc. if it's not listed I would imagine you don't have it. I have mine permanently disabled as it's another L/R gimmick that nearly works.

Cheers
Col

Thanks Col

Pretty sure I don't have it then. Nice to see not much changes from disco world to rrs world then!

Thanks again for your help.

Neil

Back again, parts ordered for rear view mirror, thanks Col.

However the rain sensor underneath looks like it should have a cover too, but I can't find anything on that at all, should I be seeing the metallic parts of this sensor or does everyone else have a black plastic cover over it?

No that is fine, no cover missing, it would normally be covered by the plastic cover you have missing at the moment, as soon as you replace the missing parts it will be hidden.

Cheers
Col

Perfect thanks Col