Has anyone fitted brembos on the rear yet I have 6pots on the front of my 320 sport but want to fit a set of smaller fours on the back has it been done

Ally but would these fit the L320 2011, the seller says they wont but not sure? Would they need any mods if they do fit

http://www.ebay.co.uk/itm/Range-Rover-L405...1438.l2649

Brembo Calipers mount direct to the stub axle, rear calipers on a L320 are mounted on a carrier bolted to the stub axle. Unless you can find a pair of carriers with the correct mounting hole centres for both stub and caliper, as brembo calipers do not slide they would also need to centralize the caliper to disc as well.

Brembo themselves used to do a Big Brake upgrade for both front and rear which were the 6 pot front and 4 pot rear, but it was nearly 3k for the rears alone. You could try JE Engineering as they used to do the kit. No RRS1 ever had brembos on the rear from the factory they are TRW calipers, not even sure the RRS2 had them the exception probably being the SVR, but then that's a different beast altogether. In addition is the electric handbrake not now part of the caliper on a RRS2? not sure about that though.

Cheers
Col

Yes scousefly bolt strait on that’s what I have on mine off a current sport

Yes scousefly bolt strait on that’s what I have on mine off a current sport

Fronts might, rears certainly don't.

https://www.dcperformance.co.uk/uprated/br...rover.html

Cheers
Col

Don’t suppose you know the brembo part number for the rear conversion caliper do you col or what else they might be on thanks

Hi,

No, sorry don't know but if you look through this list might be able to match kit number with a different make of vehicles. I think the kit for the RRS1 has now been discontinued by Brembo themselves.

http://www.brembo.com/en/Varie/BremboGTR_ApplicationList.pdf

Cheers
Col