OK, so first up, obviously it wasn't my fault, and the bollard jumped out and maliciously attacked the car, with me just an innocent bystander .






Any suggestions of how to find out the part number I need to replace? My initial reaction was that I could probably do it myself, but closer inspection reveals the rear parking sensors are in there, which will likely make it a real faff... and thus kinda pricey. Any suggestions for expensive this is likely to be, before I take it for a couple of quotes?

Phone or email forum sponsor Dan@ Duckworths, have your VIN handy so he can make sure he gets the right model year. He will tell you all the other bits the job entails and if you need any special tools. Prices are usually very good to forum members. It looks to me like you may only need the black plastic lip spoiler/aero trim and not a complete bumper which will have to be painted too as they are supplied primed by the factory. Might be worth sending him the photos as well so he can figure out the parts needed. 2020 Pangea Green 1st Edition D240 New Defender 110 is here and loving it
2018 Melting Silver Mini Countryman PHEV - soon to be replaced
2015MY Corris Grey SDv6 HSE Dynamic, the best car I have ever owned, totally reliable only a cou0le of rattles in 3 years, now no longer in my care
Also in my garage is a 1996 TDi300 Defender 90 County HT made into a fake CSW

I think fleabay may be your friend, only three different bumpers on a facelift model. With Parking Sensors, Without Parking Sensors or Autobiography. Might be lucky enough to find one in right colour, maximum hour to change including stopping for a cup of tea, be around £500.00 new from L/R unpainted at a guess.

Might be worth trying Metal Monster Junk as I think they might be a site sponsor as well.

Cheers
Col

Is that damage to the bumper though? It seems to be the stuff *below* the bumper (partly why I can't work out what to search for in terms of part name/number). Therefore, I don't need to worry about colour-matching, as surely there's only one colour of that part?

EDIT: I now realise that it is all one piece. I thought I'd got lucky by not damaging the bumper proper, but it's the same part all the way down there, alas.

EDIT: I now realise that it is all one piece. I thought I'd got lucky by not damaging the bumper proper, but it's the same part all the way down there, alas.

Partly why I suggested it might be worth trying eBay to help keep costs down a bit, the Part No. for new bare bumper is LR015113 in primer only, quite sure they do not supply ready painted. Looking at the photo it looks as if you may have damaged the O/S lower mounting brkt. as well, which is only plastic Part No. DQG000063 easy to change basically couple of self tappers and plastic rivets.

Cheers
Col

How about a good body shop, have it repaired and colour coded? In Spain - 2018 F Pace - Frightened away from the Sports due to crank failures
Gone - A couple of RRS, A couple of Disco's. However thinking of another Sport.

A good option, but would the front bumper and door lower panels not need colour coding as well to match, although in my personal opinion the cars do look far better colour coded.

Cheers
Col