Hi,

RRS 2.7d 2006

my rear lights - brake lights- high brake light & number plate light have all stop working- the fog & indicators work.

Fuse No4 looks good - any ideas before i tkae in to the menders?

thanks

rob

Bulbs?

Number plate bulb holders get water ingress & blow. I've changed mine to LED now as both were out.

I've just replaced a rear brake light (5v/21v bulb), so they do go too.

What about side lights, you didn't say?

Not sure about high level as that is LED, although 1 of the LEDs has stopped working on mine

try changing one of the brake light bulbs on the side.

if that doesn't work, brake pedal switch I guess, they are known to give problems.


number plate lights could be a broken wire at the top of the tailgate I guess.

Thanks for your replies. Just odd they all have gone together. May not be relevant but I changed the battery within a couple of days before I was advised they were not working. The battery I upgraded from 17 to 19.
I will check the bulbs the weekend. I remember I had one changed about 5 months ago!

Side lights - no nothing only fog & indicators.