Hi all. I'm trying to put in my own route into a 2016 hse dynamic navigation set up. I thought that if I plotted my route via waypoints the nav system would plan the route. This is how I used to do it. However it seems on current vehicle I have only got the opportunity to select one waypoint from the map, when I try to select a second waypoint, the " select waypoint from map", option is greyed out & only allowing me to select addresses or postcodes, the neither of which I know.
Choosing one of the three routes recommended by the car isn't the route I want. I'm certain my earlier model had the ability to select several waypoints & plan route accordingly.
Is there a way to plan my own route?
many thanks

Now sorted thanks, with advice from a youngster who is more in tune with computers than me.
kind regards

Would you mind sharing your insight? 2015 Range Rover Sport HSE TDV6, Corris Grey

hello JB72. This is how I was shown how to do it. There may be simpler methods & if you find them please let me know.

step1 set destination, let it work out the route,
2 press "review route" & select which is closest to what you want.
4 select "change route" & press "dest/waypoint"
5 press "add" & pick from map. (this is the only time this option is available. From now on it is greyed out.
6 put your WP on map & press "Go"

This is now the tricky part.
7 After the route has been re calculated & you get the verbal confirmation to start, Put finger onto screen & move the cursor to your next WayPoint. At the same time 3 boxes will appear on right of screen, press the lower one "set direction"
this will bring up another box labelled "destination or Waypoint" select waypoint, press ADD.
8 Follow on screen instructions,press RETURN TO MAP, and your route should now go where you want it to.

Follow step 8 as many times as you need to programme the route to where you want to go.

As I said, there may be easier ways & if so I'd like to know them.
regards
paul