When i set my reverse parking wing mirror setting, it works fine - once, and then seems to have a mind of its own and screws up both settings. So when I select R the drivers side mirror does a rough approximation of what I thought I'd set it to using the memory reverse and normal settings. When I select D it adjusts itself, but far to close to the car itself, so it needs manual re-adjusting. Passenger side seems fine both R and D. Any ideas?

Apologies if this is stating the obvious

Have you saved these to memory?
Are you using the same key if set up to a memory? 2011 Autobiography Santorini Black

What year is the car? Early ones had issues with memory modules

Yes, I saved the setting to memory. The car is 2007 TDV8.

I have a 2007 and have similar issues with mirror memory and also seats. Are they both on the same memory module? 2007 Range Rover Sport TDV6 HSE- Cairns Blue with 22" Stormers

Yes. I've followed the memory programming process using one memory button setting. Seat seems OK. When In reverse it seems OK, but when I then select drive the mirror now adjusts to another 'reverse' setting

+1

+1

just starting to get annoyed with our rrs we both use different keys with the lazy entry
the seat adjusts fine to which ever key is used
as does the passenger mirror
but the drivers mirror has a mind of it own, sometimes goes to the full up position, or full down and sometimes when you select reverse it goes up rather than down

its a 2005 does that sound like a memory module Mikey?

There was a TSB about it, with chassis numbers etc. Will try and find it

I started to think I was going mad as I have the same issue. 2006 TDV6