RRSPORT.CO.UK |
||
Forum Gallery Shop Sponsors |
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Arc Pipe |
|
|
Paddi Member Since: 06 Jul 2012 Location: Hertfordshire Posts: 1563 |
'57 TDV8 HSE in Hertfordshire? Must help you then
|
||
Wed Dec 04 2013 3:47pm |
|
Kravman Member Since: 11 Feb 2013 Location: Perth Posts: 11 |
Thank you Paddi it is the rear. I think I'll give it a top up as recommended and call Autoland as I'm only 45 mins away |
||
Wed Dec 04 2013 9:06pm |
|
RRSTDV8 Member Since: 12 Aug 2011 Location: Northamptonshire Posts: 8982 |
There are two failure modes for the active roll bars. The first is a leak around the pipe junction. This is fixable by replacing the pipe or seal (Bobby has posted stuff about this before). The second is a leak from the actuator itself. This is not repairable and requires a replacement unit. This happened to mine. Luckily it was covered by the warranty but the cost would have been about £1300 IIRC. 2012 SDV6 - it's missing a couple of cylinders
|
||
Thu Dec 05 2013 10:15am |
|
Paddi Member Since: 06 Jul 2012 Location: Hertfordshire Posts: 1563 |
A pictorial always helps:
|
||
Thu Dec 05 2013 2:48pm |
|
RRSTDV8 Member Since: 12 Aug 2011 Location: Northamptonshire Posts: 8982 |
Well done Paddi, that explains it perfectly
|
||
Thu Dec 05 2013 6:28pm |
|
Paul Holywood Member Since: 14 Dec 2013 Location: Hertfordshire Posts: 307 |
Hi Paddy I've been reading your posts on this topic and wondered if I can ask you a question. I have been advised today my rear arb system is showing signs of a oily mist , and explained its very serious and will cost 4-5k for the repair, when it finally goes wrong.. After three or four hours of trying to get up of the floor I thought I would ask you guys for a opinion. He wasn't specific of the precise area, but said there was evidence of an oily mist, should I panic now, or wait..! Ps, I have had no suspension faults as yet. NOTE: I asked for a thorough and complete check over while my TDV8 was having a service as the car is new to me. He did advise being a indi, he would not take on the job, and was only guessing at the costs from LR. |
||
Sat Jan 04 2014 4:21pm |
|
Paddi Member Since: 06 Jul 2012 Location: Hertfordshire Posts: 1563 |
Hi Paul,
|
||
Sat Jan 04 2014 5:38pm |
|
Paul Holywood Member Since: 14 Dec 2013 Location: Hertfordshire Posts: 307 |
Hi Paddy
|
||
Sat Jan 04 2014 8:45pm |
|
Paddi Member Since: 06 Jul 2012 Location: Hertfordshire Posts: 1563 |
Its great to feel that TDV8 on full power but I hope you are observing all the usual precautions recommended to look after your turbos; 30 secs of idle after a cold start, no hard acceleration until fully warmed up and a couple of minutes idle before shutting off. Change the oil and filter between services. Might sound a bit OCD but much preferable to kaboom and a bill for £9k 2008 MY Java Black TDV8 HSE
|
||
Sat Jan 04 2014 8:57pm |
|
Paul Holywood Member Since: 14 Dec 2013 Location: Hertfordshire Posts: 307 |
I trashed a turbo on my company van through starting it and zooming off, expensive learning curve.
|
||
Sat Jan 04 2014 9:06pm |
|
RRSTDV8 Member Since: 12 Aug 2011 Location: Northamptonshire Posts: 8982 |
I had my rear ARB replaced by a LR dealership about 18 months ago and it cost about £1400 all in, IIRC. The bar alone is about £800 and the rest was labour and VAT. 2012 SDV6 - it's missing a couple of cylinders 2008 TDV8 - it was a labour of love and is much missed |
||
Sun Jan 05 2014 9:43am |
|
Paul Holywood Member Since: 14 Dec 2013 Location: Hertfordshire Posts: 307 |
Thanks RRSTDV8
|
||
Sun Jan 05 2014 1:31pm |
|
adigorn Member Since: 17 Mar 2010 Location: Birmingham Posts: 110 |
Easily done without body off |
||
Sun Jan 05 2014 2:54pm |
|
RRSTDV8 Member Since: 12 Aug 2011 Location: Northamptonshire Posts: 8982 |
I think they did take the body off, or at least tipped the rear up a bit, to do it. 2012 SDV6 - it's missing a couple of cylinders
|
||
Sun Jan 05 2014 5:32pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2005-2024 Futuranet Ltd & Martin Lewis