Hi Everyone
Please could anyone advise me as my wiper arm has been pushed downwards to about the number plate when about 2 foot of snow fell overnight on the roof of my sport and then slid down the back window pushing the wiper down.
Can it be reset or will it be new unit
I carefully pushed it back to were it parks and tried it and it travelled about a quarter of the travel sweep.
Any clues would very helpful.
Cheers.

Undo the nut that holds the wiper arm on and remove, cycle the motor so it finds its park position then refit wiper arm in its normal parked position. Test and put kettle on  2x TDV6. SE and HSE. Both returned to sender with issues👀
TDV8 Sport HSE...... Gone. Loved it but it didn't love me!!
Now rolling in MY10 Fullfat TDV8 Vogue. Slammed it to go round corners🙈
Cruising daily #56 mph in a Volvo V8. 😱
Lots of other toys in the cupboard...😜

I like this reply!! Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

Simple 1

Thanks very much for your help took cap off centre of wiper arm and nut was loose wiper body was smooth in the
taper not sure if it is supposed to have splines but motor splines and ok, so did as you said. works great now thank you very much for your help

But did the kettle work?  2x TDV6. SE and HSE. Both returned to sender with issues👀
TDV8 Sport HSE...... Gone. Loved it but it didn't love me!!
Now rolling in MY10 Fullfat TDV8 Vogue. Slammed it to go round corners🙈
Cruising daily #56 mph in a Volvo V8. 😱
Lots of other toys in the cupboard...😜