Hi,
My handbrake will not release from the switch, has anyone had this problem. I can engage the brake from the switch, but the only way to get it off is to pull away, and this workers fine. Any Info will be appreciated.
MY 2011
Cheers RK MY 2014 3.0 SDV6 HSE Dynamic
Causeway Gray

My2011 3.0 TDV6 HSE Luxury Nara Bronze (gone)

Sounds like a faulty switch or wire. Have you spilt anything in that area recently? Bodsys Brake Bible
Software Updates Contact me
RRS Timed Heat/Remote kits - Contact me
BAS Engine Re-maps/ EGR Blank EuIII and EuIV
Clock On The Dash/ SNOTM /3Flash / BT Update /Service Reset/Error Codes read\ Gearbox Reset
See it HERE

Hi Bodsy,
Thanks for the reply, I have not been near any thing, the only thing I have done differently is I have towed a trailer. I can't see that making a difference, but that's all. It was in to steelers last week for new anti roll bar bushes.
Cheers
RK MY 2014 3.0 SDV6 HSE Dynamic
Causeway Gray

My2011 3.0 TDV6 HSE Luxury Nara Bronze (gone)

If they have changed the rear anti roll bar bushes then they might have disturbed the epb cables and trapped them just make sure they are ok.

Flack

Thanks Flack,
I will have a look, but I think it was only the front anti roll bar bushes.
RK MY 2014 3.0 SDV6 HSE Dynamic
Causeway Gray

My2011 3.0 TDV6 HSE Luxury Nara Bronze (gone)