Is the small rod that is used to remove the horn pad available for sale? Thinking about putting
a zebrano wood/leather wheel on my 09. Thx! mike murphy

Not sure if it's possible to buy one, but it is rather easy to make one, from a piece of stiff wire.

Quote:

A steel rod, diameter approx 3mm (a piece of a wire coat hanger would do nicely). bend a 5mm hook at right angle on end. Approx 100mm up rod, fashion a ring to enable it to be pulled. The land rover tool has a cross-bar here.

Have a look at this post on the D3 site for some discussion.

Rupert wrote:

Not sure if it's possible to buy one, but it is rather easy to make one, from a piece of stiff wire.

Quote:

A steel rod, diameter approx 3mm (a piece of a wire coat hanger would do nicely). bend a 5mm hook at right angle on end. Approx 100mm up rod, fashion a ring to enable it to be pulled. The land rover tool has a cross-bar here.

Have a look at this post on the D3 site for some discussion.

Do you have a Blue Peter Badge? purple people eater

There are no good days, just some days that are not as bad as others!


Gone RR 4.0 P38 Autobiography MY99 Red ( money pit)
Gone RRS MY06 2.7TDV6 HSE Rimini Red
Gone RRS MY10 3.0TDV6 HSE Bali Blue with lots of bits (never grew to love it)
Here Now - 3.6 TDV8 FFRR OVERFINCH Stornoway Grey - loving it x
My work car Ford Mondeo 2.0 TDci Zetec auto Estate in Silver

Yes, you are indeed a funnyguy!!!!!

Zebrano wood wheel..............................on a RRS..............
 SW

Sometimes it is not enough to do our best;
sometimes we must do what is required.

2005 RRS HSE 2.7 TDV6
Now: 2016 RRS HSE DYNAMIC 3.0 TDV6

purple people eater wrote:

Do you have a Blue Peter Badge?

No but Lego & Meccano featured heavily in my childhood

On ebay at £20