As title RRS 2010 LED rear lights to fit pre 2010 cars.
I have pre modifyed these lights with the correct size load resistor to enable them to be a plug and play fit into a pre 2010 car.

The pre fitted load resistor corrects the ammount of load used by the 2010 LED lights and this is used for the dash indicator lamp. if the load resistor is not fitted your dash indicator will flash fasted than it should.

These are a fantastic upgrade to the car bringing it bang up to date with the looks of the new 2010 model.

The lights are sold in pairs pre modifyed for the pre 2010 cars for only £299.00 + £20.00 for UK shipping.
in some cases the lights may have a very small minor mark or marks on the lense from storage, 99% of which could be polished out with tcut or braso they are hardly noticable but are their.

Pm's, emails or phone calls welcome, payment must be made by visa card or simlar.

Pete


 Follow Us On Twitter @bellautos

Last edited by bellautos on Mon Apr 19 2010 1:28pm. Edited 2 times in total

Here is a picture of the pre install Load Resistor needed for the pre 2010 model cars to stop the dash indicator light from flashing fast.

We have used a heavy duty version to give along lasting life of the light unit.
As you can see we have bonded the resistor to the light unit using a hi temprature bonding glue that is also water proof, The conections to the light are all soldered and heat srink is fitted w here needed.




Pete Follow Us On Twitter @bellautos

Last edited by bellautos on Mon Apr 19 2010 4:54pm. Edited 1 time in total

A better picture of the lights.

 Follow Us On Twitter @bellautos

very nice Pete.

What are the chances to fit led lights in the front set? Or how to fit led lights in the front side. 2009 Range Rover Sport 2.7 TDV6 SE, Alaska White, Almond leather, tinted windows, active rear diff, tow pack, HiICE, full spare: gone and already missed

2004 Fiat Panda 1.2 Climbing 4x4
http://www.youtube.com/watch?v=fAg4DdXAp7Y

Hi
I beleive people have taken the front lights apart and fitted LED's to them. Ive not personally done it.

In some way for what i beleive is very little money the full front end could be changed to 2010 which would look fantatic.

Just as i did with my D3 seen in this thread.

http://www.rrsport.co.uk/forum/topic17821.html


Pete Follow Us On Twitter @bellautos

I agree the front end swap looks good but don't want to lose the look of the 08 HST front end, its a shame there is no compromise!

Daz 2017 4.4 Autobiography FFRR - love this car
Gone - VW T5 Transporter
Long gone - 2009 Disco
Long gone but never out of my thoughts - 2008 TDV8 HST

Very true, the HST part would be a problem. Follow Us On Twitter @bellautos

Our other sponsor does whole front end too.....

That is true, i didnt think of that.

He may be worth a call Daz you never know he may have a 2010 HST type bumper.


Pete Follow Us On Twitter @bellautos

Last edited by bellautos on Mon Apr 19 2010 8:00pm. Edited 1 time in total

bellautos wrote:

Hi
I beleive people have taken the front lights apart and fitted LED's to them. Ive not personally done it.

In some way for what i beleive is very little money the full front end could be changed to 2010 which would look fantatic.

Just as i did with my D3 seen in this thread.

http://www.rrsport.co.uk/forum/topic17821.html


Pete

Hi
I suppose it depends on if you are doing it your self like i did or paying a company to do it, if needed i can help with part location if you wanted to do it your self.

OR if you are within traveling distance to Martin @ DCC he does a nice conversion if you dont want to do it your self. http://www.dcc4x4sidebars.co.uk/range-rove...ercharged/

Or i could possibily do it if you were nearer me.

Pete Follow Us On Twitter @bellautos

could you pm me the price shipped to Florida,33122?

Interested in a pair

Hiu
Yes no problem Follow Us On Twitter @bellautos

Hi i have these lights and have purchased the same ballast resistor, i wish i had seen your post first and i would have got them through yourselves, can you advise on how to connect the ballast resistor to the lights?

Many thanks

Connect to pin 3 and pin 5 of the connector

pete Follow Us On Twitter @bellautos