hello,
i am currently adding a new sub and amp to the RRS i am wondering if any one knows what wires i need to connect into to still be able to control it from the head unit, i know the amp is under my passenger seat, just need to know the four wires to connect my high level input. also any ideas on where to bring my amps power wire in would be a big help

Have a look in my Gallery ...might pick up something.

Probably the wires are the same as in the older models..? Malaysia Boleh!
4.2SC Chawton White, Stormers
Tasmod's Sills, Wind Deflectors, LR Sills
Clear Side Repeaters, Towbar
Larini Sports Exhaust, K&N Air Filter
______________________________
WINNER - 2008 'Tech-Head Of The Year' Award
WINNER - 2009 Outstanding Contribution
WINNER - 2009 'Tech-Head Of The Year' Award

hey thanks i am not sure why it wont let me view alot of your files something about hypertext but thanks for the help hopefully some one else on here has some knowledge and can point me in the right direction

The best way to feed the cable through the bulkhead is through a rubber gromet thats behind the brake resevoir ( its best to put the cable in some sleeving as you have to run it accross the bukhead from the batt )
i fitted the amp under the rear seat and hooked into the original sub wires ( green and green with a white stripe ) next to the rear seat on the passenger side under the trim and took the remote on feed from the rear 12v socket.Hope this helps and have a good xmas