What's the best place to get these from ? Lots of suppliers and I see they're just pressed steel rather than a cast item, so looking to the wisdom of the forum on what's the best route to change them.

Are they tricky to get out and do I need to replace the bolts as well ?

Cheers

Jonny

They aren't cast items, they're made from formed and welded sheet.

Advanced factors do an entire kit including the bolts with arms that have heavy duty bushes and the later, upgraded, ball joint.

https://www.advancedfactors.co.uk/kit683hd...6314-p.asp

Unless you're lucky, the arms usually need to be cut off as the bolts seize. So you'll almost certainly need new bolts anyway. 2012 SDV6 - it's missing a couple of cylinders
2008 TDV8 - it was a labour of love and is much missed

Really handy kit that - save scrabbling around looking for the offset washers etc. Many thanks for the link and good to support the forum sponsors.

Order on the way !