Good morning

I have a RRS SDV6 2011, car is running absolutely fine until i accelerate hard then i get the red triangle stating restricted performance.
I plug my gap tool in and clear and all is well again but this has happened 3 times now, the code i get is P22D4-13 (2F )
Turbocharger turbine inlet valve position sensor circuit- general electrical failure.
Can anybody advise me please, do i need to do anything or is this leading to something more sinister.

Thanks in advance

Chris

Quote:

The engine control module has determined an open circuit via lack of bias voltage, low current flow, no change in the state of an input in response to an output
Turbine intake valve position sensor circuit open circuit, high resistance

Mike

Many thanks for the response, when you say check continuity do you mean see if this continues to happen when i accelerate hard ?
If so do you have a rough idea of cost please

Regards

Chris

Continuity of wiring

Mike

Thanks again, wiring certainly not part of my limited knowledge.
I will see what my local indy makes of it should it occur again.

Regards