I have sadly sold my 2013 RRS L320 into the trade. Before the car was traded in I removed all the genuine Range Rover accessories I fitted during my ownership.

Over the next few days I will be listing these all on RRSport.co.uk.

This post is for the sale of a one-off project to carbon dip the engine cover. I had the work done professionally and the results were truly amazing!

The cover is in "as new" condition with no scratches or signs of wear. I only fitted it on special occasions like car club meetings.

This is the work that went into the project:

1. Remove the rubber locating tabs, oil filler tube rubber and sound proofing.
2. Degrease plastic.
3. Rub down plastic to provide a key for the primer.
4. Primer 1st coat.
5. Rub down primer.
6. Primer 2nd coat.
7. Rub down primer.
8. Float carbon fibre film on water tank.
9. Spray activating agent on carbon fibre film.
10. Dip cover in water tank with carbon fibre film floating on it
11. Leave to dry
12. Spray cover with 2K clear lacquer.
13. Bake cover in spray booth to harden lacquer.
14. Polish final finish.
15. Refit rubber fixings and sound proofing

I have reduced the asking price to £160 for a quick sale, I would prefer collection in person from Skegness.

I will be listing the following items, all in excellent condition, over the next few days:

1. Genuine Range Rover Boot Mat - SOLD
2. Genuine Range Rover Rubber Mats - SOLD
3. Genuine Range Rover Detachable Tow Bar with 2 keys - fits perfectly in foam boot tray cut-out - SOLD
4. Genuine Range Rover Bottle Jack - fits perfectly in foam boot tool tray cut-out - SOLD
5. Genuine Range Rover Warning Triangle in case - fits perfectly in foam boot tray cut-out - SOLD
6. Genuine Ranger Rover Boot Tray - SOLD
7. New set of 20 chrome wheel nuts
8. New front scuttle black plastic cover panel - where windscreen wipers are located
9. Pair of new front A-pillar covers
10. Pair of used rear C-pillar covers
11. New foam boot tool tray
12. New Genuine Range Rover Scissor jack and jacking handle in cover
13. Used black plastic side sill covers (without side-step cut outs)
14. Fully refurbished 20" Range Rover Alloys fitted with Pirelli winter tyres
















[/s]

Last edited by Evo5man on Sat Apr 23 2022 1:38pm. Edited 3 times in total

Pity it is so large and you are in the UK (or is the problem me being in Australia).
I am looking for an engine cover for my RRS2010 3 litre.
They are a rare animal down here for some reason.
The Hydrodipping turned out really well... I am envious of whoever gets it.

Hi Andy,

Thanks for your message, glad you liked the end result of the hydro-dipping. I was considering having the A Pillar, D pillar and scuttle black trims done the same but was not sure of the durability if exposed to the UK weather.

Happy to deliver in person to Australia if you cover the travel expenses

Bump!

Price reduced to £160 for a quick sale

Do you still have engine cover

Hi H,

Yes, the engine cover is still available.

I have also replied to your PM.

Regards,

Steve