Hi all ,I have a rear parking sensor on the rear corner not working .Its on the passenger side the other three are working .i can hear them clicking .the question is can i get the sensor out with out removing the bumper , i can see it and get my hand on it but cant seem to push it out of the bumper to replace it .What am i doing wrong and were is the best to get a replacement cheers guys

Hi got the same , did you find a reasonable swap and resolve the difference.

Sorry have to add , better to remove the bumper all together , as long as all the self tappers play ball !

I did change a rear corner one last month. Without bumper removal.

You have to look at the replacement sensor to work out how it’s clipped in, (the raised bit) so you can work out which position you need to splay the clip, and then push the sensor inwards

Must have been lucky , to get it off without bumper removal! Bumper not that bad to remeove , sensor on its way.