Hi all want to run a cable from the engine compartment to the cabin, had a look in the engine bay but couldn't see any entry points have I missed something.
Cheers Peter If it ain't broken down it soon will
Pulling my Vanmaster tin tent with my 2005 RED RRS HSE TDV6
1973 Land Rover Series 3 110 safari Gone but not forgotten
1990 Discovery 200Tdi Gone thank god
1996 Discovery 300Tdi sadly missed
2003 Discovery TD5 Gone to LR heaven
2004 Discovery TD5 Gone to Aberdeen hope it likes it there
2005 RRS HSE Rimini Red (my Disco 3 in a posh frock) sadly selling
Think I see a pattern here

I saw some instructions say use the bonnet cable grommet if it’s only a small cable

In the bulkhead on the drivers side, there is a grommet for the main loom to pass through. This grommet has a nipple on it for overlay harness’ to pass through if required. Nip off the top of this nipple and pass the wire through. I had to use a straightened coat hanger with the wire taped on the end. 2019 5.0 SC SVA (Current)
2012 5.0 SC AB. Sadly written off by a campervan
23 plate Focus ST (Current)
1942 VEP Ford GPW Jeep (Willys) (Current)
1943 Whites M16 Halftrack (Current)
16 plate Eurofighter Typhoon, 2 x Eurojet engines with 20,000lbs thrust each. 1380mph