Hi guys
I've got a little question for you all
My suspension on my rear left side seems to be about an inch or so lower than the right to be honest I've only just noticed it I thought it was just the ground wonky i looked on the 4x4 screen and all the sensors say it's fine and everything is working ok
Do you guys have any thoughts why it could be a bit wonky

Cheers Phil c

Hi Phil,

It is possible that level sensor is wearing and is starting to give different voltages so the controller thinks it's at the correct height.

Also

If you have chaned any susspension parts i.e upper or lower arms / bushes etc. then you will needto recallibrate the sensors.

and the simple answer is that under normal operation the susspension will only adjust when a difference greater than 10mm is detected. so nothing is wrong at all....

Thanks for the reply mate I'll keep an eye on it I've not changed anything on the rear only on the front


Phil